Operation Manual

TNT Front Panel

COMPRESSOR ON/OFF SWITCH

This button turns the compressor on or off.

VOLUME

This knob controls the overall volume of the amplier.

DDT

™

(Distortion Detection Technique)

This button prevents power amplier clipping that can sound bad and damage speakers. The “IN” or

"DEFEAT" position of the switch bypasses the DDT circuit. However, Peavey recommends the DDT stay

enabled for optimum system performance.

HEADPHONE OUTPUT

1/4" headphone output for personal monitoring.

DDT INDICATOR LIGHT

When the DDT is enabled, the red Protect/ClipLED will ash when DDT is triggered. It is normal operation for

the LED to ash. However, if the LED is constantly illuminated, the gain level needs to be adjusted to prevent

possible equipment damage. When the DDT is defeated, the LED becomes a clip indicator.

POWER SWITCH

To apply power to the unit, ip the switch to the “On” position. The green LED will illuminate, indicating

power is being supplied.

CAUTION: The on/off switch in this unit does not break both sides of the primary mains. Hazardous

energy can be present inside the chassis even when the on/off switch is in the OFF position.