Accessory List

CP-8391-456
F-27382-1 © Copyright 2006 TAC. All Rights Reserved. 55
Electronic Actuator Drive
Model Chart
This drive provides proportional control of an
electric gear train actuator from a variable voltage
DC signal produced by a controller.
Features:
• Variable Vdc signal acceptance and proportional drive of
certain MP-400, MP-4000, MP-2100, and MP-9000 series
actuators.
• Rugged aluminum case.
• Direct actuator mount model.
• Adjustable start point, span, and hysteresis.
• Driving capability of up to three actuator drives by typical
controller.
Mounting and Field Wiring Connections.
Model No. Input Signal Range
Voltage
50/60 Hz
Operating Span Start Point Impedance
Field Wiring
Connections
CP-8391-456
0 to 10 Vdc factory set
Field adjustable
1 to 5, 2 to 10, 5.5 to
9.5, 2 to 18.5, and
10 to 20 Vdc
120 Vac
or
240 Vac
10 Vdc factory set
Field adjustable
3.5 to 16.5 Vdc
0 Vdc factory set
Field adjustable
-5.5 to 10 Vdc
19K Ω Other input
impedances
obtained by adding
series and/or
parallel resistors.
Color coded pigtail
leads.
Typical Actuators.
Actuator Series
Volts
(60 Hz)
Torque
Stroke
(Deg.)
Spring
Return
Lb.-in. N-m
MP-465
ab
a
CP-9301 drive may be an alternative solution.
b
CAUTION: Remove red and blue transformer wires from terminals 7 and 8 of actuator and tape.
120
50 5.6 180
CW
MP-475
ab
CCW
MP-483
ab
220 24.9
90
⎯
MP-485
ab
180
MP-486
ab
MP-495
ab
450 50.8
MP-9750
ab
800 90.4
MP-9810
1300 146.9
MP-9830 90
MP-9910 1600 179.2
180
MP-4851
ab
240 220 24.9
C
P-839
1
-456