Spec Sheet

ManualsBrandsPedrollo ManualsTools and HardwareMono Phase Multi-Stage Centrifugal Pump with 0.45 kW, 3/5 HP, 130 Liter per Minute Flow Rate

2-5CR 60-80-100

86 | GENERAL CATALOGUE 60 Hz

INSTALLATION AND USE

Suitable for use with clean water and with liquids that are not

chemically aggressive towards the materials from which the pump

is made. As a result of their quietness these pumps are widely

used in domestic applications such as the distribution of water in

combination with small and medium sized pressure tanks, and for

the irrigation of gardens and orchards, etc.

The pump should be installed in an enclosed environment or

sheltered from inclement weather.

OPTIONS AVAILABLE ON REQUEST

• Pump body with NPT ANSI B 1.20.1 threaded ports

• Special mechanical seal

• Other voltages

GUARANTEE

2 years subject to terms and conditions

PERFORMANCE RANGE

• Flow rate up to 130 l/min (7.8 m³/h)

• Head up to 67 m

APPLICATION LIMITS

• Manometric suction lift up to 7 m

• Liquid temperature between -10 °C and +40 °C

• Ambient temperature up to +40 °C

• Max. working pressure 7 bar

• Continuous service S1

CONSTRUCTION AND SAFETY STANDARDS

EN 60335-1

IEC 60335-1

CEI 61-150

EN 60034 -1

IEC 60034-1

CEI 2-3

CERTIFICATIONS

Company with management system certied DNV

ISO 9001: QUALITY

Multi-stage centrifugal pumps

Clean water

Domestic use

Civil use

| 60 Hz |

Summary of content (4 pages)

PAGE 1
2-5CR 60-80-100 Multi-stage centrifugal pumps Clean water Domestic use Civil use PERFORMANCE RANGE •• Flow rate up to 130 l/min (7.8 m³/h) •• Head up to 67 m APPLICATION LIMITS •• Manometric suction lift up to 7 m •• Liquid temperature between -10 °C and +40 °C •• Ambient temperature up to +40 °C •• Max.
PAGE 2
CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 70 5 0 10 60 Hz 15 5 20 10 n= 3450 min-1 HS= 0 m 25 15 20 30 US g.p.m. 25 Imp g.p.m. feet 5CR80 60 200 5CR100 175 4CR80 50 Head H (metres) 4 4CR100 40 150 3CR80 124 3CR100 3CR60 30 100 2CR80 75 20 50 10 25 0 0 10 0 20 30 1 40 50 2 60 70 3 80 4 90 100 5 110 6 120 130 7 l/min 0 0 8 m³/h Flow rate Q 4 MODEL Single-phase Three-phase POWER (P2) kW HP 2CRm 80 2CR 80 0.37 0.50 3CRm 60 3CR 60 0.
PAGE 3
2-5CR 60-80-100 POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Stainless steel AISI 304 complete with threaded ports in compliance with ISO 228/1 2 BODY BACKPLATE Stainless steel AISI 304 3 IMPELLERS Noryl FE1520PW 4 DIFFUSERS Noryl complete with anti-wear ring 5 MOTOR SHAFT Stainless steel EN 10088-3 - 1.
PAGE 4
DIMENSIONS AND WEIGHT f n a h1 h h3 DN1 h2 DN2 w s n1 MODEL PORTS Single-phase Three-phase 2CRm 80 2CR 80 3CRm 60 3CR 60 3CRm 80 3CR 80 4CRm 80 4CR 80 5CRm 80 5CR 80 3CRm 100 3CR 100 4CRm 100 4CR 100 5CRm 100 5CR 100 DN1 DN2 a 113 1” 1” kg DIMENSIONS mm 138 113 138 f h 367 h2 h3 n n1 w 182 392 411 202 * 367 182 411 h1 s 9 132 51 183 182 120 87 10 9 202 * 10 1~ 3~ 6.5 6.5 6.5 6.5 7.3 7.3 8.3 7.7 10.7 10.7 7.9 7.3 10.6 10.6 11.