Product Manual

ManualsBrandsPedrollo ManualsCentrifugal PumpsCentrifugal Water Pump — 19,020 GPH, 3in. Ports

INSTALLATION AND USE

Suitable for use in civil and agricultural applications. The high

eciency and continuous duty capabilities makes these pumps

ideal for use in activities such as ood and spray irrigation, drawing

water from lakes, rivers and wells, or for any number of dierent

industrial applications where the characteristics of high ow rates

and mid to low head are required.

The pump should be installed in an enclosed environment or

sheltered from inclement weather.

OPTIONS AVAILABLE ON REQUEST

• Pump body with NPT ANSI B 1.20.1 threaded ports

• Special mechanical seal

• Other voltages

GUARANTEE

2 years subject to terms and conditions

PERFORMANCE RANGE

• Flow rate up to:

- 317 US g.p.m. for the HF 6A

- 290 US g.p.m for the HF 6B

• Head up to:

- 60 feet for the HF 6A

- 48 feet for the HF 6B

APPLICATION LIMITS

• Manometric suction lift up to 22 feet

• Liquid temperature between 14 °F and 194 °F

• Ambient temperature up to 104 °F

• Max. working pressure:

– 10 bar (145 psi)

• Continuous service S1

CONSTRUCTION AND SAFETY STANDARDS

EN 60335-1

IEC 60335-1

CEI 61-150

EN 60034-1

IEC 60034-1

CEI 2-3

CERTIFICATIONS

Company with management system certied DNV

ISO 9001: QUALITY

ISO 14001: ENVIRONMENT

Centrifugal pumps

➠

High ow

Clean water

Industrial use

Agricultural use

Summary of content (4 pages)

PAGE 1
HF Centrifugal pumps Clean water ➠ High flow Agricultural use Industrial use PERFORMANCE RANGE • • Flow rate up to: - 317 US g.p.m. for the HF 6A - 290 US g.p.m for the HF 6B Head up to: - 60 feet for the HF 6A - 48 feet for the HF 6B INSTALLATION AND USE Suitable for use in civil and agricultural applications.
PAGE 2
CHARACTERISTIC CURVES AND PERFORMANCE DATA 60 Hz n= 3450 rpm HS= 0 m HF6A Head H (feet) 4 HF6B Flow rate Q 4 MODEL POWER (P2) Single-ph. Three-ph. kW HP HFm 6B 1.5 2 HFm 6A HF 6B HF 6A 2.2 3 Q US g.p.m. 0 IE3 H Q = Flow rate H = Total manometric head HS = Suction height Performance class of the three-phase motor (IEC-60034-30) feet 50 75 100 125 150 175 200 225 250 275 290 317 48.2 47.6 46 45 43 40 37 33 29 25 19 16 60.7 59.
PAGE 3
HF POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Cast iron complete with threaded ports in compliance with ISO 228/1 2 BODY BACKPLATE Cast iron 3 IMPELLER Brass HF 6 4 MOTOR SHAFT Stainless steel EN 10088-3 - 1.
PAGE 4
DIMENSIONS AND WEIGHT f n a h1 DN1 h h2 DN2 w MODEL Three-phase HFm 6B HF 6B HFm 6A HF 6A lb DIMENSIONS mm PORTS in Single-phase s n1 DN1 DN2 a 3” 3” 68 f 411 441/411 h h1 h2 n 120 192 240 n1 w s 6 12 1~ 3~ 26.5 25.5 29.2 26.7 ABSORPTION MODEL Single-phase VOLTAGE MODEL VOLTAGE 230 V 115 V 127 V Three-phase HFm 6B 12.0 A 24.0 A 22.3 A HF 6B 8.6 A HFm 6A 14.5 A – – HF 6A 10.7 A 230 V 230 V 460 V 5.0 A 7.6 A 4.2 A 6.2 A 9.0 A 4.