Spec Sheet

ManualsBrandsPedrollo ManualsTools and HardwareSKRm2 115 Volts Self-Priming Centrifugal Pumps with 2 HP, 400 Liters per Minute

SPRINKLER

114 | GENERAL CATALOGUE 60 Hz

Self-priming centrifugal pumps

Clean water

Domestic use

Civil use

INSTALLATION AND USE

Suitable for use with clean water and with liquids that are not

chemically aggressive towards the materials from which the pump

is made. The self-priming SPRINKLER pumps are designed to pump

water even in cases where air is present. Because of their reliability

and the fact that they are easy to use, they are recommended for

use in domestic and civil applications such as the distribution of

water in combination with pressure tanks, and for the irrigation of

gardens and orchards, etc.

The pump should be installed in an enclosed environment or

sheltered from inclement weather.

OPTIONS AVAILABLE ON REQUEST

• Other voltages

• IPX5 protection

PERFORMANCE RANGE

• Flow rate up to 400 l/min (24.0 m³/h)

• Head up to 36 m

APPLICATION LIMITS

• Manometric suction lift up to 9 m (HS)

• Liquid temperature between -10 °C and +40 °C

• Ambient temperature up to +40 °C

• Max. working pressure 10 bar

• Continuous service S1

CONSTRUCTION AND SAFETY STANDARDS

EN 60335-1

IEC 60335-1

CEI 61-150

EN 60034 -1

IEC 60034-1

CEI 2-3

CERTIFICATIONS

Company with management system certied DNV

ISO 9001: QUALITY

60 Hz | SPRINKLER

Summary of content (4 pages)

PAGE 1
SPRINKLER Self-priming centrifugal pumps Clean water Domestic use Civil use PERFORMANCE RANGE •• Flow rate up to 400 l/min (24.0 m³/h) •• Head up to 36 m INSTALLATION AND USE •• Manometric suction lift up to 9 m (HS) •• Liquid temperature between -10 °C and +40 °C •• Ambient temperature up to +40 °C •• Max. working pressure 10 bar •• Continuous service S1 Suitable for use with clean water and with liquids that are not chemically aggressive towards the materials from which the pump is made.
PAGE 2
CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 40 10 0 20 30 10 40 20 60 Hz 50 30 60 40 70 50 80 60 n= 3450 min-1 HS= 0 m 90 100 70 110 US g.p.m. 80 90 Imp g.p.m. feet 125 SKR 1.5 35 100 Head H (metres) 4 30 25 75 20 50 15 10 25 5 0 0 0 50 1 2 3 100 4 5 6 150 7 8 9 200 10 11 12 250 13 14 15 300 16 17 18 350 19 20 21 400 22 23 24 l/min 25 0 26 m³/h Flow rate Q 4 MODEL POWER (P2) Single-phase Three-phase kW HP Service Factor SKRm 1.5 SKR 1.
PAGE 3
SPRINKLER POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Cast iron with an Epoxy Electro Coating treatment, with NPT ANSI B 1.20.1 threaded ports 2 BODY BACKPLATE Cast iron with an Epoxy Electro Coating treatment 3 DIFFUSER Noryl FE1520PW 4 IMPELLER Noryl FE1520PW 5 MOTOR SHAFT Stainless steel EN 10088-3 - 1.
PAGE 4
DIMENSIONS AND WEIGHT f n a h DN1 h1 h3 h2 DN2 s w MODEL n1 PORTS Single-phase Three-phase SKRm 1.5 SKR 1.5 DN1 DN2 1½” 1½” NPT NPT DIMENSIONS mm kg a f h h1 h2 h3 n n1 w s 1~ 3~ 91 465 241 186 39 225 223 178 37.5 11 27.3 – ABSORPTION MODEL VOLTAGE MODEL Single-phase 220 V 110 V 115 V Three-phase SKRm 1.5 11 A 22 A 22 A SKR 1.5 VOLTAGE 220 V 380 V 220 V 440 V – – – – PALLETIZATION MODEL Single-phase Three-phase SKRm 1.5 SKR 1.