DS-C560-1X3 46" - 60" (117 - 152 cm) MAX 500 lb (227 kg) ENG 1 2015-06-30 #:009-9119-2 (2015-10-14)
This page intentionally left blank.
WARNING Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. The cart or stand is not affixed or secured to the floor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit. Displays must be removed before moving cart.
Parts (Before beginning, make sure you have all parts shown below).
L (3) M (1) computer cover cross support N (1) O (2) computer shelf extension adaptor P (4 ) Q (4) R (120) S (40) T (24) cord bracket knurled knob M8 x 16mm M8 square nut cover clip U (8 ) V (20) W (12) X (12) Y (1) M5 x 10mm bar nut nylon shoulder washer M6 x 12mm 1/4" power bit Z (1) 5mm allen wrench AA (1) 4mm allen wrench 5 2015-06-30 #:009-9119-2 (2015-10-14)
1-1 x4 B Z A (5mm) R (4) 1-2 x4 Do not fully tighten hardware S (2) R (2) SIDE VIEW 6 2015-06-30 #:009-9119-2 (2015-10-14)
2 x2 Z S (2) (5mm) S (2) G D R (4) S (2) S (2) D R (4) 7 2015-06-30 #:009-9119-2 (2015-10-14)
3 x3 TIGHTEN CONNECTING HARDWARE ENG FLUSH EDGES ENG Casters must be flush to end of horizontal leg support.
5 TIGHTEN CONNECTING HARDWARE x2 I 6-1 x2 Do not fully tighten hardware R (4) O V (2) 9 2015-06-30 #:009-9119-2 (2015-10-14)
6-2 J (2) O (2) TIGHTEN CONNECTING HARDWARE 7 TIGHTEN CONNECTING HARDWARE LOCK WHEELS H 10 2015-06-30 #:009-9119-2 (2015-10-14)
8-1 1/8" (3mm) R (4) x6 1/8" (3mm) S (4) J R (2) 8-2 K (3) TIGHTEN CONNECTING HARDWARE K (3) DIS PL AY H EIG HT DIS PL AY H EIG HT 11 2015-06-30 #:009-9119-2 (2015-10-14)
9 K (4) C 12 2015-06-30 #:009-9119-2 (2015-10-14)
10 TIGHTEN CONNECTING HARDWARE M (3) TIGHTEN HARDWARE (X2) TIGHTEN HARDWARE (X2) Cross supports must center on vertical leg supports.
11 Center adapter brackets vertically on back of screen. X .98" (25mm) 7.87" (200mm) 3.94" (100mm) 2.50" (63mm) 15.75" (400mm) X 2.50" (63mm) 0.
12-1 Must hang displays on bottom row first; Secure pin in "locked" position. 12-2 Z OPTIONAL: Insert M5 x 10mm type-F socket pin screws (U) to lock latches.
Display Adjustment IN OUT SIDE SIDE TILT BACKWARD SIDE TILT RIGHT TILT LEFT TOP SIDE UP TILT FORWARD TOP DOWN ROTATE LEFT 16 ROTATE RIGHT 2015-06-30 #:009-9119-2 (2015-10-14)
13 P Q TIGHTEN CONNECTING HARDWARE P Q OPTIONAL: Unlock wheels to move cart to desired location; Lock wheels before hanging screens.
14-1 N 14-2 1/8" (3mm) N M U (2) TIGHTEN CONNECTING HARDWARE N 18 2015-06-30 #:009-9119-2 (2015-10-14)
15 Route cables through cord brackets.
16 Display Removal Pull down on bracket cords and hold. Swing screen away from cart and lift to remove. 17 Remove displays from top row first.
18 Repeat step 16 to remove displays from middle row second. "UNLOCKED" POSITION 19 Repeat step 16 to remove displays from bottom row last.
This page intentionally left blank.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com Peerless-AV Europe Unit 3 Watford Interchange, Colonial Way, Watford, Herts, WD24 4WP, United Kingdom Customer Care 44 (0) 1923 200 100 www.peerless-av.com Peerless-AV de Mexico Ave de las Industrias 413 Parque Industrial Escobedo Escobedo N.L Mexico 66050 Servicio al Cliente 01-800-849-65-77 www.peerless-av.com © 2015, Peerless Industries, Inc.
