DS-C560-2X2 46" - 60" (117 - 152 cm) MAX 500 lb (227 kg) ENG 1 2014-04-14 #:009-9082-12 (2019-09-04)
WARNING ENG - Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. Use with heavier displays may result in instability causing tip over resulting in death or serious injury.
ENG Parts (Before beginning, make sure you have all parts shown below).
N (2 ) dual rail assembly L (1 ) M (1 ) computer cover computer shelf O (4 ) P (4 ) cord bracket Q (104) R (32) M8 square nut M8 x 16mm V (1 ) 1/4" power bit S (24) cover clip W (1 ) 5mm allen wrench T (10) M5 x 10mm knurled knob U (16) bar nut X (16) nylon shoulder washer Y (16) M6 x 12mm Z (1 ) 4mm allen wrench 4 2014-04-14 #:009-9082-12 (2019-09-04)
1-1 x4 B W A Q (4) 1-2 x4 ENG Do not fully tighten hardware W R (2) Q (2) SIDE VIEW 5 2014-04-14 #:009-9082-12 (2019-09-04)
2 x2 W R (4) R (4) D F Q (4) R (4) F Q (4) 6 2014-04-14 #:009-9082-12 (2019-09-04)
3 x2 W D TIGHTEN CONNECTING HARDWARE ENG Flush edges ENG Casters must be flush to end of horizontal leg support.
5 x2 TIGHTEN CONNECTING HARDWARE W H 6 W ENG LOCK WHEELS TIGHTEN CONNECTING HARDWARE E 8 2014-04-14 #:009-9082-12 (2019-09-04)
7-1 x4 1/8" (3mm) R (4) 1/8" (3mm) Q (6) W K 7-2 W TIGHTEN CONNECTING HARDWARE K (4) 9 DIS 2014-04-14 PL AY H EIG HT #:009-9082-12 (2019-09-04)
8 W TIGHTEN CONNECTING HARDWARE N ENG Tighten. ENG Tighten. ENG Cross supports must center on vertical leg supports.
9 W TIGHTEN CONNECTING HARDWARE N ENG Tighten. ENG Tighten. ENG Cross supports must center on vertical leg supports.
10 O (4) P (4) TIGHTEN CONNECTING HARDWARE O ENG Optional: Unlock wheels to move cart to desired location; Lock wheels before hanging screens.
11-1 X x4 I ENG Center adaptor brackets vertically on back of screen.
12-1 "LOCKED" POSITION ENG Must hang displays on top row second; Secure pin in "locked" position. 12-2 Z ENG Optional: Insert M5 x 10mm type-F socket pin screws (T) to lock latches.
13 ENG Display adjustment IN OUT SIDE SIDE TILT BACKWARD TILT RIGHT SIDE TILT LEFT TOP SIDE UP TILT FORWARD TOP DOWN ROTATE LEFT 15 2014-04-14 ROTATE RIGHT #:009-9082-12 (2019-09-04)
14 M 16 2014-04-14 #:009-9082-12 (2019-09-04)
15-1 Z 1/8" (3mm) M T (2) 15-2 Z L TIGHTEN CONNECTING HARDWARE M 17 2014-04-14 #:009-9082-12 (2019-09-04)
16 S (24) C (6) 18 2014-04-14 #:009-9082-12 (2019-09-04)
17 ENG Route cables through cord brackets.
18-1 ENG Display removal ENG Pull down on bracket cords and hold. ENG Swing screen away from cart and lift to remove. 18-2 ENG Remove displays from top row first.
ENG This page intentionally left blank.
ENG This page intentionally left blank.
ENG This page intentionally left blank.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless-AV”) warrants to original end-users that each Peerless-AV® mounting product will be free from defects in material and workmanship, under normal use, for the applicable warranty period (from date of the original installation of the product). At its option, Peerless-AV will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
