DS-S555-3X3 46" - 55" (117 - 140 cm) MAX 900 lb (409 kg) ENG 1 2014-07-30 #:009-9089-1
This page intentionally left blank.
WARNING ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
Parts (Before beginning, make sure you have all parts shown below).
J (3) H (1) I (1) dual cross support computer cover computer shelf K (2) extension adaptor N (3) cross support L (4) locking tab M (4) cord bracket O (6) P (112) Q (52) plate connections M8 x 16mm M8 square nut R (8 ) cover clip S (20) T (4) U (1) M5 x 10mm M5 x 12mm 1/4" power bit V (1) W (36) X (36) 5mm allen wrench nylon shoulder washer M6 x 12mm Y (1) 4mm allen wrench Z (8) AA (8) rawl bolt M6 x 35mm 5 2014-07-30 #:009-9089-1
1 x2 Do not fully tighten hardware K P TOP VIEW Q 2 x2 B TIGHTEN CONNECTING HARDWARE A Z (4) 6 2014-07-30 #:009-9089-1
3 x2 C TIGHTEN CONNECTING HARDWARE B 7 2014-07-30 #:009-9089-1
4 x6 1/8" (3mm) P 1/8" (3mm) Q G 5 x2 DIS PL AY H EIG HT DIS PL AY H EIG HT TIGHTEN CONNECTING HARDWARE 8 2014-07-30 #:009-9089-1
6-1 6-2 R D x2 M T L TIGHTEN CONNECTING HARDWARE L M T TOP VIEW 9 2014-07-30 #:009-9089-1
7-1 4 7-2 ENG Drill mounting holes into supporting surface (3" (76 mm) minimum depth required). ENG Align base. Mark mounting holes. 3/8" (10mm) 3" (76mm) 3/8" (10mm) 55.00" (1397mm) 7-3 3/8" (10mm) ENG Align base. Install using concrete anchors provided. AA ENG Tighten. 55.00" (1397mm) ENG Maximum 35 ft • lb (47 N.M.).
8 Repeat for each cross support (x3).
9-1 Must install bottom row first. TIGHTEN CONNECTING HARDWARE (X4) TIGHTEN HARDWARE (X2) TIGHTEN HARDWARE (X2) Cross supports must center on columns.
9-2 Must install middle row second. TIGHTEN CONNECTING HARDWARE (X4) TIGHTEN HARDWARE (X2) TIGHTEN HARDWARE (X2) Cross supports must center on colmuns.
9-3 Must install top row last. TIGHTEN CONNECTING HARDWARE (X4) TIGHTEN HARDWARE (X2) TIGHTEN HARDWARE (X2) Cross supports must center on columns.
10 Side support brackets must center on cross supports.
11 Center adaptor brackets vertically on back of screen. X .98" (25mm) 7.87" (200mm) 3.94" (100mm) 2.50" (63mm) 15.75" (400mm) X 2.50" (63mm) 0.
12-1 Must hang displays to bottom row first; Secure pin in "locked" position. "LOCKED" POSITION 12-2 Must hang displays to middle row second; Secure pin in "locked" position.
12-3 Must hang displays to top row last; Secure pin in "locked" position. "LOCKED" POSITION 12-4 OPTIONAL: Insert M5 x 10mm type-F socket pin screws to lock latches.
Display Adjustment IN OUT SIDE SIDE TILT BACKWARD TILT RIGHT TOP SIDE UP TILT FORWARD SIDE TILT LEFT TOP DOWN ROTATE LEFT 19 ROTATE RIGHT 2014-07-30 #:009-9089-1
13 I 14 1/8" (3mm) I H S (2) TIGHTEN CONNECTING HARDWARE I 20 2014-07-30 #:009-9089-1
15 Route cables through cord brackets.
This page intentionally left blank.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com Peerless-AV Europe Unit 3 Watford Interchange, Colonial Way, Watford, Herts, WD24 4WP, United Kingdom Customer Care 44 (0) 1923 200 100 www.peerless-av.com Peerless-AV de Mexico Ave de las Industrias 413 Parque Industrial Escobedo Escobedo N.L Mexico 66050 Servicio al Cliente 01-800-849-65-77 www.peerless-av.com © 2014, Peerless Industries, Inc.
