User Manual

ISSUED: 02-09-07 SHEET #: 087-9014-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.

1 of 3

Note: some parts may not appear exactly as illustrated.

Installation and Assembly - Multi-Channel Speaker

Accessory

Models: MSA-301,

MSA-301S

IMPORT ANT! Read entire instruction sheet before you start inst allation and assembly .

MSA- 30 1 MSA-301S

Descr i p tio n Qty. P art # P ar t #

c ros s s upport 1 087-1051 087-4051

s i de ex t ension 2 087-1054 087-4054

s peak er brac k et 3 087-1057 087-4057

ex t ension brack et bot tom 1 087-1050 087-4050

M5 x 10 mm phil li ps sc rew 24 520-1233 520-1233

#10 SAE flat washer 12 540-9400 540-9400

M5 x 20 mm phil li ps sc rew 12 510-1208 510-1208

adhes ive velcro 3 600-1018 600-1018

P art s L ist

MAXIMUM LOAD CAPACITY:

50 lb (22.68 kg)

NOTE: For use with FS-3200 C and FS-3200 LR speakers only

PAGE 1
Installation and Assembly - Multi-Channel Speaker Accessory Models: MSA-301, MSA-301S IMPORTANT! Read entire instruction sheet before you start installation and assembly. MAXIMUM LOAD CAPACITY: 50 lb (22.68 kg) NOTE: For use with FS-3200 C and FS-3200 LR speakers only Parts List A B C D E F G H Description cross support side extension speaker bracket extension bracket bottom M5 x 10 mm phillips screw #10 SAE flat washer M5 x 20 mm phillips screw adhesive velcro Qty.
PAGE 2
Installation to adapter plate 1 Loosen screws on plasma adapter. Then place cross support bracket (A) between plasma adapter and mount. Tighten screws through cross support bracket to plasma adapter securely. Refer to adapter plate instructions for installation of screen. Note: some parts may not appear exactly as illustrated.
PAGE 3
Installation of Speakers 3 Position speaker brackets (C) to speakers using correct hole pattern as shown below and attach using twelve M5 x 20mm screws (G). LEFT SPEAKER G RIGHT SPEAKER CENTER SPEAKER C C G C G 4 Attach speaker brackets (C) to side extension brackets (B) and extension bottom bracket (D) using twelve M5 x 10mm screws (E).