PANA-C84103 MAX 500 lb (227 kg) ENG 1 2015-06-30 #:126-9068-1
WARNING Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. The cart or stand is not affixed or secured to the floor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit. Displays must be removed before moving cart.
ENG This page was intentionally left blank 3 2015-06-30 #:126-9068-1
Parts (Before beginning, make sure you have all parts shown below).
L (1) M (1) X (2) rail weldment computer shelf vertical support bracket K (1) computer cover O (4 ) locking tab W (2 ) lock tab AA (2) M5 x 30mm P (84) M8 x 16mm Q (64) R (24) S (6) cover clip M8 square nut M5 x 10mm BB (8) U (1) 1/4" power bit T (4) M5 x 12mm cable tie V (1) 5mm allen wrench Y (1) 4mm allen wrench N (4) cord bracket 5 Z (2) clip hook bracket 2015-06-30 #:126-9068-1
1 B Repeat for each caster assembly.
2 Repeat for each base leg assembly.
3 Repeat for each base leg assembly. TIGHTEN CONNECTING HARDWARE ENG FLUSH EDGES ENG Casters must be flush to end of horizontal leg support. 4 Repeat for each base support (x10).
5 TIGHTEN CONNECTING HARDWARE Repeat for each side (x2).
7 TIGHTEN CONNECTING HARDWARE G(2) E 8 TIGHTEN CONNECTING HARDWARE E 38.0" 96.
9 1/8" (3mm) 1/8" (3mm) Repeat for each vertical support bracket (x4).
11 M TIGHTEN HARDWARE (X2) TIGHTEN HARDWARE (X2) Cross support must center on vertical leg supports.
12 O N T TIGHTEN CONNECTING HARDWARE O N T OPTIONAL: Unlock wheels to move cart to desired location; Lock wheels before hanging screens.
13 J I 14 2015-06-30 #:126-9068-1
14 W (2) S (2) 14 Z (2) AA (2) 15 2015-06-30 #:126-9068-1
15-1 15-2 Secure screw in "locked" position.
16 L 17 1/8" (3mm) L K S (2) TIGHTEN CONNECTING HARDWARE L 17 2015-06-30 #:126-9068-1
Repeat for each cover.
Route cables through cord brackets.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
