User's Manual

ManualsBrandsPeerless Industrial Group ManualsProjector AccessoriesPeerless Industrial Group Industrial Group Projector Accessories ST 630P-S

Max UL Load Capacity: 80 lb (36.3 kg)

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

ISSUED: 04-27-05 SHEET #: 201-9421-7 01-12-06

Features:

• Fits 10" to 24" LCD flat panel screens

• One-touch tilt for effortless positioning and adjustment of the screen

Installation and Assembly:

Universal Tilt Wall Mount for 10" - 24" LCD Flat Panel

Screens

Models: ST 630P, ST 630P-S, ST 630, ST 630-S

This product is intended for use with UL

Listed products and must be installed by a

qualified professional installer.

Summary of content (7 pages)

PAGE 1
Installation and Assembly: Universal Tilt Wall Mount for 10" - 24" LCD Flat Panel Screens Models: ST 630P, ST 630P-S, ST 630, ST 630-S Features: R • Fits 10" to 24" LCD flat panel screens • One-touch tilt for effortless positioning and adjustment of the screen This product is intended for use with UL Listed products and must be installed by a qualified professional installer. Max UL Load Capacity: 80 lb (36.3 kg) 3215 W. North Ave.
PAGE 2
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-729-0307. • This product should only be installed by a qualified professional.
PAGE 3
Parts List A B C D E F G H I Description adapter plate tilt assembly Alligator® anchor M4 x 10 mm phillips screw M4 x 20 mm phillips screw retaining spacer #14 x 2-1/2" hex head wood screw M5 x 6 mm screw security driver Qty 1 1 2 4 4 4 2 1 1 ST 630P Part # 095-1346 095-0359 590-0097 504-9012 504-9020 590-5005 5S1-015-C03 520-1023 ST 630P-S Part # 095-4346 095-0360 590-0097 504-9012 504-9020 590-5005 5S1-015-C03 520-1023 A C ST 630 Part # 095-1346 095-0359 590-0097 504-9012 504-9020 590-5005 5S1-015-
PAGE 4
Installation to Single Wood Stud Wall WARNING • Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components. 1 Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based on its edges, draw a vertical line down the stud’s center. Place tilt assembly (B) on wall as a template, making sure that the two mounting holes are over the stud centerline.
PAGE 5
Installation to Solid Concrete or Cinder Block WARNING • When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifications.
PAGE 6
Attaching Adapter Plate to Flat Panel Screen WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail. 2 FOR VESA® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (A) to back of screen using four M4 x 10 mm screws (D) as shown below. FOR VESA 100 MOUNTING PATTERN: Choose hole pattern as shown below.
PAGE 7
Installing and Removing Flat Panel Screen 3 Attach screen to tilt assembly (B). Tighten M5 x 6 mm screw (H) to lock screen to tilt assemby. SCREEN Note: For security models, use security driver (I) to tighten M5 x 6 mm screws (H). H To remove screen from mount, loosen screw (H) and lift screen off of mount. A WARNING • Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely handle placement of the screen.