User's Manual

ISSUED: 05-23-02 SHEET #: 120-9012-4 10-29-07

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 2

Description Qty. Part No.

A toggler (ACC 215 only) 2 560-9708

toggler (ACC 415 only) 4 560-9708

toggler (ACC 615 only) 6 560-9708

B 1/4-20 x 2.5" phillips (ACC 215 only) 2 520-9521

1/4-20 x 2.5" phillips (ACC 415 only) 4 520-9521

1/4-20 x 2.5" phillips (ACC 615 only) 6 520-9521

C 1/4" SAE washer (ACC 615 only) 6 540-9440

Assembly Instructions - Metal Stud Fastener Kits

Models: ACC 215, ACC 415, ACC 615

Parts List

PAGE 1
Assembly Instructions - Metal Stud Fastener Kits Models: ACC 215, ACC 415, ACC 615 Parts List Description A B C Qty. Part No. toggler (ACC 215 only) 2 560-9708 toggler (ACC 415 only) 4 560-9708 toggler (ACC 615 only) 6 560-9708 1/4-20 x 2.5" phillips (ACC 215 only) 2 520-9521 1/4-20 x 2.5" phillips (ACC 415 only) 4 520-9521 1/4-20 x 2.5" phillips (ACC 615 only) 6 520-9521 1/4" SAE washer (ACC 615 only) 6 540-9440 A B C 1 of 2 Visit the Peerless Web Site at www.
PAGE 2
FOR METAL STUD WALLS ONLY: Drill four 1/2" (13mm) dia. holes through drywall and studs at locations corresponding to wall plate. Insert togglers (A) as shown below... WARNING • Product must be mounted through drywall that has a minimum thickness of 1/2" and into metal studs, 26 gauge or heavier. A • Make sure that togglers are anchored into the center of the studs as shown in figure 1. The use of an "edge to edge" stud finder is highly recommended. ∅ 1/2" (13 mm) Pivot end of toggler (A).