User's Manual

2 of 5

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-865-2112 or 708-865-8870.

ISSUED: 05-27-99 SHEET #: 128-9103-6 06-21-10

IMPORTANT PRE-ASSEMBLY INFORMATION:

Ceiling Trays (A), and (A1) are designed to ﬁ t within a 24" (610 mm) x 24" (610 mm) section of a conventional sus-

pended ceiling system. Ceiling runners (see DETAIL 1, page 4) should have a "T" cross section and a minimum

height of 1.5" (38 mm). In cases where 24" (610 mm) x 48" (1219 mm) ceiling tiles are used, cut one tile in half and

add another 24" (610 mm) ceiling runner in order to make a 24" (610 mm) x 24" (610 mm) section.

For certain installations it may be best to install ceiling anchors (step 4) before installing the ceiling tray (step 3).

For FLUSH MOUNT TUBE Installation: From

the top, thread the ﬂ ush mount tube (M) through

retaining collar in ceiling tray (A).

Skip to step 3.

For EXTENSION COLUMN Installation: From the

bottom up, thread extension column (not included)

up through retaining collar in adjustable collar mount

plate. Align notch in extension column with hole in

collar and fasten using M5 x 10 mm penta pin screw

(N) with M5 penta pin driver (O) as shown below.

1 1/2" EXTENSION COLUMN

(SOLD SEPARATELY)

(UL LISTED EXT OR AEC SERIES)

1 2