User's Manual

ManualsBrandsPeerless Lighting ManualsWork LightPeerless Lighting Lighting Work Light ACC570

ISSUED: 11-14-07 SHEET #: 054-9054-5

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

1 of 4

NOTE: Read entire instruction sheet before beginning installation and

assembly.

Installation and Assembly - Round Ceiling Plate

Models: ACC570, ACC570S,

ACC570W

ACC 570 ACC 570S ACC 570W

Description Qty. Part # Part # Part #

round ceiling plate 1 055-1798 055-4798 055-2798

#14 x 2.5" wood screw 4 5S1-015-C03 5S1-015-C04 5S1-015-C04

M5 x .8 x 10 mm phillips screw 1 520-9250 520-2005 520-2005

M5 x .8 x 10 mm socket pin screw 1 520-1164 520-2031 520-2031

4 mm allen wrench 1 560-9646 560-9646 560-9646

rubber grommet 1 530-9401 530-9401 530-9401

concrete anchor 4 590-0097 590-0097 590-0097

Parts List

• Do not begin to install your Peerless product until you have read and understood the instructions and warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please

call Peerless customer care at 1-800-865-2112.

• This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached

hardware and components.

• Never exceed the Maximum UL Load Capacity.

• If mounting to wood joists or wood beam ceilings, make sure that mounting screws are anchored into the center of

the joists or beams. Use of an "edge to edge" stud finder is highly recommended.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power.

WARNING

Parts may appear slightly different than illustrated.

Maximum UL Load Capacity: 150 lb (68 kg)

This product is UL Listed. It must be

installed by a qualified professional

installer.

Before you begin, make sure all parts shown are included with your product.

Summary of content (4 pages)

PAGE 1
Installation and Assembly - Round Ceiling Plate Models: ACC570, ACC570S, ACC570W This product is UL Listed. It must be installed by a qualified professional installer. NOTE: Read entire instruction sheet before beginning installation and assembly. R Maximum UL Load Capacity: 150 lb (68 kg) Before you begin, make sure all parts shown are included with your product. Parts List A B C D E F G A Description round ceiling plate #14 x 2.5" wood screw M5 x .8 x 10 mm phillips screw M5 x .
PAGE 2
1 Place grommet (F) into hole of ceiling plate (A). A NOTE: Make sure grommet overlaps retaining collar. Grommet may require some force to fit in hole and will appear slightly deformed. RETAINING COLLAR F WARNING • For safety, extension column must be locked to threaded fitting with screw. Extension Column Applications 2 Insert end of extension column into threaded fitting of ceiling plate (A). Tighten four or five complete turns.
PAGE 3
Installation to Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings WARNING • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that ceiling plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess of 80 in. • lb (9 N.M.).
PAGE 4
Installation to Solid Concrete or Cinder Block WARNING • When installing Peerless ceiling plates on cinder block, verify that you have a minimum of 1-3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifications.