Manual
4
7
⁄16”
2
1
⁄4”
5
1
⁄4”
2
3
⁄4”
DAY
5
DAY
10
5
10
DAY
5
DAY
10
5
10
Catalog Number
___________ ___________ ___________ ___________ ___________ ___________ ___________
Emergency Type
2
Switching Lamp Color Mounting Type / Overall Suspension
4
Finish Options
(Blank) None
EC
3
Emergency
circuit
EL Emergency
battery pack
EN
3
Emergency
battery pack
w/night light
circuit
SCT Single circuit
DCT
3
Dual circuit
L/LP* No lamp
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP841 4100K 80+ CRI
*Wired for full wattage
lamps only, do not install
low wattage lamps
F1/ T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/ Hard ceiling (horizontal
J-box)
12 12”
15 15”
18 18”
21 21”
24 24”
XX XX”
Overall suspension is
measured from ceiling to
bottom of luminaire
C041 White white
(low gloss)
ACG Adjustable cable grippers
CP Chicago plenum (available with F1A only)
DU
5
Dust cover
ELH Emergency through wiring w/separate feed
ELS
3
Emergency through wiring w/single feed, shared neutral
ELS2
3
Emergency through wiring w/single feed, separate neutrals
GLR Fusing (fast blow)
GMF Fusing (slow blow)
MCS Matching feed canopy at support
OJB Oset junction box
___________ ___________ ___________ ___________ ___________ ___________ ___________ ___________ ___________ ___________
Luminaire # of Lamps in
Cross Section
Lamp Type Reflector Shielding Luminaire Row
Length
Maximum
Section Length
Voltage Ballast Type # of Emergency
Modules
NRM9QS
NRM9QST
1
2
3
1
28T5 28W T5
54T5HO 54W T5HO
32 32W T8
WHR White
reflector
SPR Specular
reflector
FST Frosted
diuser
X FT
(4’ increments)
R4 4’ section(s)
R8 8’ section(s)
120
277
GEB10 <10% THD Electronic
(32 T8, 28T5, 54T5HO)
GEB10/347V 347V Generic non-dim Only available
with 10-day QuickShip
OS5C Osram 0-10V dim or line voltage
control (32 T8)
ADEZ Advance Mark 10 dim (54T5HO)
OSDIM Osram 0-10V dim (54T5HO)
ADZT Advance Mark 7 0-10V dim
(54T5HO). Only available with
10-day QuickShip
(Blank) None
1SE 1 section
2SE 2 sections
XSE X sections
Sample Catalog Number: NRM9QS 2 28T5 SPR FST 40FT R8 277 GEB10 DCT LP835 F1/18 C041
Specifications
CONSTRUCTION — Nominal 4
7
⁄16”W x 2
1
⁄4”H for T5/T5HO and 5
1
⁄4”W x 2
3
⁄4”H for T8,
extruded aluminum housing. Die-cast aluminum end caps are mechanically attached with no
exposed fasteners.
SHIELDING — Frosted acrylic diuser.
REFLECTORS — Semi-specular high reflectance aluminum or high reflectance white painted steel.
Select semi-specular (SPR) for a wide distribution and maximum row spacing. Select white (WHR)
for narrow applications (i.e. corridors) to soften side wall shadows.
FINISH — White polyester powder painted.
LUMINAIRE LENGTH — 4’ and 8’ lengths in a single section. For total luminaire length add
1
⁄2” for
each standard end cap or 4
1
⁄2” for each sculptured end cap (T5/T5HO only). Using internal joiners,
4’ and 8’ sections can be joined to form longer rows.
DISTRIBUTION — 8–16% downlight. See non-QuickShip spec sheet for photometrics.
Dimensions / Lamping
(1,2,3) T5, T5HO (1,2) T8
NRM9QS
Naro
INDIRECT
Notes: 1 Not available with 32 T8 lamps 2 Emergency type is installed in last 4’ of luminaire sections. Separate feed required unless ELS or ELS2 is specified
3 Not available with dimming 4 Maximum of 240” 5 Not available with 3 54T5HO lamps
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting. Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject
to change without notice. 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx