manual

ACC 502 This kit contains a special penta-pin
TM
tool
and ten M10 penta-pin
TM
screws for theft resistance.
When assembling the TV Mount, use penta-pin
TM
screws in place of M10 socket head screws included
with the TV Mount.
FOR JUMBO
2000 ONLY:
FOR A SECURE
INSTALLATION A
SLIGHT TILT IS
REQUIRED.
Jumbo 2000
TM
models feature an access hole which
exposes the head of one phillips screw on each side of
the mount. For a secure installation the bracket must
be set with at least enough tilt to prevent access to
these screws.
SIDE VIEW
ACCESS
HOLE
ISSUED: 6-11-98 SHEET# 128-9015-2 01-09-07
ACC 502 This kit contains a special penta-pin
TM
tool
and ten M10 penta-pin
TM
screws for theft resistance.
When assembling the TV Mount, use penta-pin
TM
screws in place of M10 socket head screws included
with the TV Mount.
FOR JUMBO
2000 ONLY:
FOR A SECURE
INSTALLATION A
SLIGHT TILT IS
REQUIRED.
Jumbo 2000
TM
models feature an access hole which
exposes the head of one phillips screw on each side of
the mount. For a secure installation the bracket must
be set with at least enough tilt to prevent access to
these screws.
SIDE VIEW
ACCESS
HOLE
ISSUED: 6-11-98 SHEET# 128-9015-2 01-09-07
ACC 502 This kit contains a special penta-pin
TM
tool
and ten M10 penta-pin
TM
screws for theft resistance.
When assembling the TV Mount, use penta-pin
TM
screws in place of M10 socket head screws included
with the TV Mount.
FOR JUMBO
2000 ONLY:
FOR A SECURE
INSTALLATION A
SLIGHT TILT IS
REQUIRED.
Jumbo 2000
TM
models feature an access hole which
exposes the head of one phillips screw on each side of
the mount. For a secure installation the bracket must
be set with at least enough tilt to prevent access to
these screws.
SIDE VIEW
ACCESS
HOLE
ISSUED: 6-11-98 SHEET# 128-9015-2 01-09-07
ACC 502 This kit contains a special penta-pin
TM
tool
and ten M10 penta-pin
TM
screws for theft resistance.
When assembling the TV Mount, use penta-pin
TM
screws in place of M10 socket head screws included
with the TV Mount.
FOR JUMBO
2000 ONLY:
FOR A SECURE
INSTALLATION A
SLIGHT TILT IS
REQUIRED.
Jumbo 2000
TM
models feature an access hole which
exposes the head of one phillips screw on each side of
the mount. For a secure installation the bracket must
be set with at least enough tilt to prevent access to
these screws.
SIDE VIEW
ACCESS
HOLE
ISSUED: 6-11-98 SHEET# 128-9015-2 01-09-07