manual

1 of 2

ISSUED: 05-04-10 SHEET #:145-9077-1

Model: DS-ACC760

Installation and Assembly:

Cable Release Kit

NOTE: Read entire instruction sheet before you start installation and assembly.

Before you start make sure all parts listed are included with your product.

PartsList

Description Qty. Part#

A fastenerpiece 4 145‐1144

B cable 4 600‐0153

REMOVE

TOP RELEASE

MECHANISM

Remove top release mechanism from right and left side of video wall mount assembly wall plate.

PAGE 1
Installation and Assembly: Cable Release Kit Model: DS-ACC760 NOTE: Read entire instruction sheet before you start installation and assembly. Parts List Description A fastener piece B cable Qty. 4 4 A Part # 145‐1144 600‐0153 Before you start make sure all parts listed are included with your product. B 1 Remove top release mechanism from right and left side of video wall mount assembly wall plate.
PAGE 2
. Run cable (B) through hole in video wall mount assembly and fastener piece (A) as shown. 3. Run cable (B) through hole in release mechanism and up through second row of holes in fastener piece (A) as shown. 4. For easy accessibility: Tape or secure loop end of cable onto top of display or wall. REPEAT STEPS WITH OPPOSITE SIDE OF VIDEO WALL MOUNT. 2 HOLE B 4 3 LOOP B B A A RELEASE MECHANISM HOLE DISPLAY 2 Position DS-ACC760 cables in locations as shown.