DS-MBY942L-3X1 40" - 42" (102 - 107 cm) MAX DS-MBY947L-3X1 300 lb (136 kg) 46" - 48" (117 - 122 cm) MAX 300 lb (136 kg) ENG 1 2014-05-01 #:126-9002-1
WARNING ENG - This product is designed to be installed on wood joist/beam or solid concrete ceilings. Hardware is included for wood joist/beam and solid concrete installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
ENG Parts (Before beginning, make sure you have all parts shown below).
J (1) K (9) 4mm allen wrench cable tie L (2) M (2) main frame main post N (8 ) O (8) P (8) Q (32) carriage bolt small washer nylock nut hex head screw R (4 ) S (2) T (2) #10 x 1/2" phillips screw M5 x 10mm socket pin screw support bracket 4 U (12) multiwasher 2014-05-01 #:126-9002-1
1 x2 7/16" (11mm) M P (4) O (4) L N (4) 5 2014-05-01 #:126-9002-1
2-1 T (2) 2-2 3/8" (10mm) Q (8) 6 2014-05-01 #:126-9002-1
3-1 7/16" (11mm) ENG Loosen, adjust, tighten.
3-3 x2 E D 3-4 SLOT J ENG Align slot of extension column S (2) 3-5 R (4) 8 2014-05-01 #:126-9002-1
4-1 G A (3) G 4-2 3/8" (10mm) A (3) Q (24) 9 2014-05-01 #:126-9002-1
5-1 5-2 J B,C ENG OPTIONAL B,C F ENG Remove ENG Replace 10 2014-05-01 #:126-9002-1
6 X ENG Center adapter brackets vertically on back of screen. B C X 7 ENG Screws must get at least three full turns and fit snug.
8-1 8-2 B,C J ENG Loosen. 8-3 B,C J ENG Tighten.
10 +15° ENG remove, adjust, retighten ENG Tighten. ENG Pre-set tilt positions of 0°, 5°, 10° or 15°. 11 ENG Adjust. ± 3/8" (± 9.
12 ENG OPTIONAL: cable management K (3) A 13-1 J 13-2 B,C ENG Loosen.
14-1 B,C J ENG OPTIONAL WARNING ENG Kickstand is for maintenance only ENG Loosen.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
