Instructions / Assembly

ManualsBrandsPeerless ManualsKitchenCore 4 in. Centerset 1-Handle Low-Arc Bathroom Faucet in Chrome

INGLE HANDLE LAVATORY FAUCET

MODELS P130LF, P131LF, P135LF, P135LF-W,

P136LF, P136LF-M & P138LF-M

LLAVE DE LAVAMANOS DE UNA MANIJAS

MODELOS P130LF, P131LF, P135LF, P135LF-W,

P136LF, P136LF-M Y P138LF-M

ROBINET À UNE MANETTE POUR LAVABO

MODÈLES P130LF, P131LF, P135LF, P135LF-W,

P136LF, P136LF-M ET P138LF-M

ASME A112.18.1 / CSA B125.1

ASME A112.18.2 / CSA B125.2

Record Your Model Number Here For Future Reference

Anote Aquí Número del Modelo Comprado Para Referencia Futura

Inscrivez le numéro de modèle ici pour pouvoir le retrouver.

ASSEMBLY PARTS LIST

LISTA DE PIEZAS PARA LA INSTALACIÓN

LISTE DES PIЀCES

Description

Descripción

Description

Faucet

Llave

Robinet

1 1

Gasket

Empaque

Joint

Mounting Washers & Nuts

Arandelas de Montaje y Tuercas

Rondelles et Écrous

Coupling Nuts

Tuercas de Acoplamiento

Écrou de Raccordement

Lift Rod

Barra de Alzar

Tige de Manoeuvre

Pop-Up

Desagüe automático

Renvoi Mécanique

Quantity

Calidad

Quantité

You may need

Usted puede necesitar

Articles dont vous pouvez avoir besoin:

Water supply hook-ups:

(NOT PROVIDED)

Choose hook-ups for 1/2" I.P.S. connections: Ball

nose riser (3/8" O.D. copper tubing), or 1/2" I.P.S.

faucet connector.

Suministros de agua:

(NO PROPORCIONADAS)

Escoja conexiones para I.P.S. de 1/2": Tubos

montante bola-nariz (tubería de cobre de 3/8" D.E.),

o conector de llave I.P.S. de 1/2".

Raccords :

(NON FOURNIS)

Choisissez des raccords compatibles 1/2 po IPS.

Tubes-raccords à portée sphérique (tube en cuivre

3/8 po d.e.) ou raccords de robinet 1/2 po IPS.

Silicone sealant:

(NOT PROVIDED)

If sink is uneven use silicone sealant under base

of faucet.

Sellador de silicón:

(NO PROPORCIONADAS)

Si el fregaderos está desnivelado use sellador

de silicón debajo de la base del borde.

Composé D'étanchéité à la silicone :

(NON FOURNIS)

si la surface de l’évier est inégale, appliquez du

composé d’étanchéité à la silicone sous la base

du robinet.

Wrench(es):

(NOT PROVIDED)

For faucet removal/installation.

Llave(s):

(NO PROPORCIONADAS)

Para quitar/instalación de fregaderos.

Clé(s):

(NON FOURNIS)

pour pose et dépose de robinet

Sink Hole Dimensions

Dimensiones del Hoyo Fregaderos

Dimensions des orices de I’évier

Allow clearance for lift rod and handle movements.

Permita un espacio para los movimientos de alzar la barra y la manija.

Laissez le dégagement nécessaire aux mouvements de la tirette et des

manettes.

1-1/8" Dia.

(29 mm)

(102 mm)

1-1/8"Max.

(29 mm)

1"Dia.

(25 mm)

2"Max

(51 mm)

Estimated Time For Assembly

The estimated time to install this faucet is 45 minutes. The estimated

time to install the pop-up assembly is 30 minutes. These estimates do

not include removing the old faucet and pop-up assembly.

Tiempo Estimado para Instalar

El tiempo estimado para instalar esta llave de agua es 45 minutos. El

tiempo estimado para instalar el ensamble del desagüe automático es

30 minutos. Estos estimados no incluyen el tiempo que toma quitar la

llave de agua vieja y el ensamble del desagüe automático.

Durée d’installation estimée

La durée d’installation de ce robinet est estimée à 45 minutes. La

durée d’installation estimée du renvoi mécanique est de 30 minutes.

Ces estimations n’incluent pas la dépose du vieux robinet et du vieux

renvoi.

The Peerless

Installation Helpline

1-800-438-6673

www.peerlessfaucet.com

Instruction Manual Printed in China

Manual de Instrucciones Impreso en China

Manuel d’instructions Imprimé en Chine

12/03/2013 1 66399 Rev.F

P130LF

P131LF

P135LF

P135LF-W

P136LF

P136LF-M

P138LF-M

Summary of content (8 pages)

PAGE 1
INGLE HANDLE LAVATORY FAUCET MODELS P130LF, P131LF, P135LF, P135LF-W, P136LF, P136LF-M & P138LF-M LLAVE DE LAVAMANOS DE UNA MANIJAS MODELOS P130LF, P131LF, P135LF, P135LF-W, P136LF, P136LF-M Y P138LF-M ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.
PAGE 2
Peerless® Lifetime Faucet and Finish LimitedWarranty limitation or exclusion may not apply to you. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Peerless Faucet Company for all warranty claims. All parts and finishes of the Peerless® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for as long as the original consumer purchaser owns their home.
PAGE 3
RP70194▲ Handle w/Set Screw & Button Manija con Tornillo de Ajuste y Botón Manette avec Vis de Calage et Bouton RP70204 Knob Handle w/Button, Screw, Connector and Set Screw Perilla con Botón, Tornillo, Conectador y Tornillo de Ajuste Manette Sphérique avec Bouton, Vis et Vis de Calage 1 Adjusting Ring Anillo de Ajuste Anneau de Réglage RP77763▲ Repair Kit Equipo/Herramientas para reparaciones Kit de réparation RP70203▲ Lift Rod (Not supplied in some models) Barra de Alzar (No proporcionadas en algunos m
PAGE 4
Care Instructions Care should be given to the cleaning of this product. To clean: • Wipe gently with a damp cloth. • Blot dry with a soft towel. 1 WARNING: SCRUBBING BUBBLES® BATHROOM CLEANER and LYSOL® BASIN TUB AND TILE CLEANER must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles. If overspray gets onto the handles, immediately wipe them dry with a soft cotton cloth.
PAGE 5
1 2 1 2 1 2 1 2 2 SHUT OFF WATER SUPPLIES. Disconnect and remove old faucet. Place gasket (1) on bottom of new faucet. Assemble nuts (2) to studs. Place faucet through mounting holes in sink. Slide washers (1) in place under sink and between nuts, with slotted openings around tubes. Secure faucet to sink by tightening nuts (2) with a wrench. For metal pop-up installation refer to steps 3A-3D;for plastic popup installation refer to steps 4A-4D; for grid strainer installa- tion refer to steps 5A-5D.
PAGE 6
3C 3D 3 4 4 5 5 1 2 3 2 1 6 Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non removable (5). Hand tighten pivot nut (1). Attach horizontal rod (1) to strap (2) using clip (3). Insert lift rod (4) into strap and tighten screw (5). Connect assembly to drain (6). Quite la tuerca del pivote (1). Instale la barra horizontal (2) y el tapón (3) como desmontable (4) o fijo (5). Apriete la tuerca mano (1).
PAGE 7
4C 4 4D 5 3 4 2 5 1 2 3 1 6 Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non-removable (5). Hand tighten nut (1). Attach horizontal rod (1) to strap (2) using clip (3). Install lift rod (4), tighten screw (5). Connect assembly to drain (6). Quite la tuerca del pivote (1). Instale la barra horizontal (2) y el tapón (3) como desmontable (4) o fijo (5). Apriete la tuerca mano (1). Conecte la barra horizontal (1) a la barra chata (2) usando el gancho (3).
PAGE 8
5C 5D 1 1 2 Apply silicone sealant to underside of grid flange (1). Insert grid strainer assembly (2) up through bottom of lavatory. Screw grid flange back on and secure. Pull grid strainer straight down into drain hole and secure gasket, washer and nut (1). DO NOT TURN GRID STRAINER WHILE TIGHTENING NUT OR SEALANT MAY NOT SEAL DRAIN. REMOVE EXCESS SEALANT. Connect assembly to drain. Aplique sellador de silicón a la parte de abajo del reborde de la rejilla (1).