Dimensions Guide

PSP-B-P188775 Rev. F
STANDARD SPECIFICATIONS:
• Slip-on tub spout
• Maximum 1.75 gpm @ 80 psi, 6.6 L/min @ 550 kPa
• Tub/Shower requires 1 1/2" wall cavity
• Valve has back-to-back installation capability
• Forged brass body
• Field adjustable means to limit handle rotation into
hot water zone
• Temperature control to rotate a maximum of 120°
from full cold to the maximum temperature
• Single Handle
• Pressure Balance
• Temperature Only Controlled with Handle
WARRANTY:
• Parts and Finish
–
Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
TUB/SHOWER FAUCET
• Lever Handle Tub/Shower
1/2"
(13 mm)
Face of plasterguard
should be flush with
finish wall line
Maximum Allowable
Deviation
Supply
2 3/4"
(71 mm)
C\L supply lines
3 1/2"
(89 mm)
7"
(178 mm)
8"
(203 mm)
Min.
18"
(457 mm)
Max.
2 15/32"
(63 mm)
3 23/32"
(95 mm)
6 3/32"
(155 mm)
5 11/32"
(136 mm)
2 15/32"
(62 mm)
5 11/32"
(136 mm)
2 15/32"
(62 mm)
P188775
▲
COMPLIES WITH
• ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
• ASSE1016
• EPA WaterSense
®
▲ Designate Proper Finish Suffix
SHOWER HEAD(S)
POMME(S) DE DOUCHE
CABEZA(S) DE REGADERA
Full Body
Spray
RP44121▲ RP70537▲ 1.75 GPM
RP71609▲
*1/2*-14 threaded tub spout with
slip-on adapter included