Technical Specifications
PSP-B-PTR188700 Rev. D
Rough-In:
STANDARD SPECIFICATIONS:
WARRANTY
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME 1016
• Pressure Balance Valve Body.
• Back-to-back installation capability.
• Cartridge utilizes integral check valves to prevent
the cross low of water within the valve. Valve
reduces the low of water to 0.5 GPM within 5 seconds
of the complete loss of pressure in the cold water
supply line. Outlet water temperature is maintained
within + 3
o
F variation with changes in either hot or
cold supply of up to 50 percent of the normal supply
pressure. Temperature is controlled by handle with cold
water always coming on irst.
• Forged brass body.
• Field adjustable means to limit handle rotation
into hot water zone.
• Temperature control to rotate a maximum of 120°
from full cold to the maximum temperature.
• Single Handle.
• Temperature Only Controlled with Handle.
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and inishes; or,
for commercial users, for 5 years from the date
of purchase.
• 5 year limited warranty on electronic parts (other
than batteries); or for commercial users, for 1 year
from the date of purchase. No warranty is provided
on batteries.
PTR188700
1/2-14 NPT
1/2-14 NPT 1/2-14 NPT
1/2-14 NPT
2 5/8"±1/2"
(67±13 mm)
2 5/8"±1/2"
(67±13 mm)
2 5/8"±1/2"
(67±13 mm)
2 5/8"±1/2"
(67±13 mm)
2 5/8"±1/2"
(67±13 mm)
2 5/8"±1/2"
(67±13 mm)
PTR188700-UN
PTR188700-UNWS
PTR188700-IP
PTR188700-IPWS
PTR188700-PX
PTR188700-PXWS
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
6"
(152 mm)
6"
(152 mm)
6"
(152 mm)
6"
(152 mm)
6"
(152 mm)
6"
(152 mm)
3 3/16"
(81mm)
3 3/16"
(81mm)
3 3/4"
(96mm)
5 3/8"
(137mm)
4 15/16"
(125mm)
3 3/8"
(86 mm)
3 3/8"
(86 mm)
3 3/8"
(86 mm)
3 3/8"
(86 mm)
3 3/8"
(86 mm)
3 3/8"
(86 mm)
3 3/16"
(81mm)
3 3/16"
(81mm)
3 3/16"
(81mm)
3 3/16"
(81mm)
3 3/8"
(84 mm)
Finished Wall
Finished Wall
Finished Wall Finished Wall
Finished Wall
Finished Wall
Stringer
Stringer
Stringer
Stringer
Stringer
Stringer
PTR188700-UN PTR188700-UNWS
PTR188700-IP
PTR188700-PX PTR188700-PXWS
PTR188700-IPWS
4 7/8"
(123mm)
1/2" PEX
1/2" PEX
1/2-14 NPT
1/2-14 NPT
3 3/8"
(84 mm)
PTR188700-UN
Male thread without stops
PTR188700-UNWS
Male thread with stops
PTR188700-IP
Female thread without stops
PTR188700-IPWS
Female thread with stops
PTR188700-PX
Male thread outlet, PEX crimp inlet, without stops
PTR188700-PXWS
Male thread outlet, PEX crimp inlet, with stops