Specification Sheet
TUB AND SHOWER FAUCET
Full Body
Spray
ø 2 1/2"
(ø 64 mm)
Face of plasterguard
should be flush with
nish wall line
Supply
C/L
Supply
lines
RP82100
▲
1.75 GPM RP82102
▲
2 3/16"
(55 mm)
ø 3 3/16"
( ø 80 mm)
8" (203 mm)
min.
18"(457 mm)
max.
5 13/16"
(147 mm)
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
PSP-B-PTT188782 Rev. D
p
Designate Proper Finish Sufx
STANDARD SPECIFICATIONS:
• Maintains a balanced pressure of hot and cold water even
when a valve is turned on or off elsewhere in the system.
• For use with MultiChoice
®
Universal rough valve body.
(R10000 Series)
• Tub/Shower. Requires 2 3/4
"
wall cavity.
• Back-to-back installation capability.
• Forged brass body.
• Cartridge utilizes integral check valves to prevent the cross
flow of water within the valve.
• Field adjustable means to limit handle rotation into
hot water zone.
• Red/blue markings on escutcheon for hot/cold identification.
• Temperature control to rotate a maximum of 120° from full
cold to the maximum temperature.
• Temperature only controlled with handle.
•
"
-LHD
"
models indicate less showerhead.
• Showerhead maximum flow rate is 1.75 gpm @ 80 psi,
6.6 L/min @ 550 kPa.
WARRANTY:
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and 5 years
for all other commercial uses, in each case from the date
of purchase.
PTT188782
p
PTT188792
p
PTT188792-
p
LHD
■ Shower Only (PTT188782 Series)
■ Tub/Shower (PTT188792 Series)
COMPLIES WITH
• ASME A112.18.1 / CSA B125.1
• EPA WaterSense
®
- Applies to PTT188782 & PTT188792 only
PTT188782
p
PTT188792
p
PTT188792-
p
LHD
ø 6 1/2"
(ø165 mm)
2 15/16"
(75 mm)
2 3/4"
(70mm)