User Manual

2
2017-07-25 #:180-9109-2 (2017-08-28)
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at
least three full turns
and fi t snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
1
2
ENG
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
4
+1/2
3
5/32"
(4mm)
5/16"
(8mm)
3/8"
(10mm)
ENG - This product is designed to be installed on wood stud, solid concrete or cinder block walls. Before
installing make sure the supporting surface will support the combined load of the equipment and hardware.
Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never
exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and
position equipment. Be careful not to pinch fi ngers when operating the mount. For support please call customer
care at 1-800-865-2112.
WARNING