User Manual

21
2017-07-25 #:180-9109-2 (2017-08-28)
Specifi cations subject to change without notice
PRODUCT SPECIFICATIONS
Troubleshooting
TIPS
Distorted Audio • Source level should not exceed 80%.
• Verify the the 3.5mm audio plug is fully inserted.
No Audio • Verify that the soundbar is plugged into an outlet that has power. Ensure that the audio
signal cable is connected to the audio-out port on the TV. Make sure that the source
volume is not muted and that the volume level is not at zero. Aim the remote at the
soundbar and select the desired input of the source that is playing.
Problem
Connecting a
Bluetooth Enabled
Device
• Aim the remote at the front of the soundbar and hit the Blutetooth icon.
• Make sure Bluetooth is enabled on the device that is being connected and that you are
within 33' of the soundbar.
• Complete a device scan on the device that is being connected and select "peerless-
AV" from the list of devices.
• If "peerless-AV" is not present on the list, turn the Bluetooth on the device off. Turn the
Bluetooth on the soundbar off by switching to the Aux input. Turn the Bluetooth on the
soundbar back on by pressing the Bluetooth button on the soundbar remote. Turn the
Bluetooth on your device back on and perform another scan.
Sound Bar
TV Size Range 42" (107cm) and above
Built-in Class D Amplifi er Total System Power: 200 watts
SPL 105db
Crossover Digital Signal Processing (DSP)
Drivers (2) 3" [76mm] Aluminum Drivers
Tweeters (2) 1.5" [38mm] Titanium Domes
Audio Inputs (1) Digital Optical Audio, (1) Analog 3.5mm connector,
(1) Bluetooth 4.0 input
Environmental Protection
Rating
IP65
Frequency Response 50Hz - 20kHz
Operating Temperature Range -40° - 120°F (-40°C - 49°C)
Vesa Mounting Pattern 400mm wide pattern
Product Dimensions 38.13" x 3.91" x 4.32" (969 x 99 x 110mm)
Product Weight 9.7lb (4.4kg)