Installation Guide

ManualsBrandsPegasus ManualsBathCannes 36 in. Vanity in Distressed Grey with Marble Vanity Top in White with White Basin

CANNES 37" VANITY SET

10702-VS37J-GR

Vanity Installation

Product Specification

• Birch Solid Wood Frame and MDF

• Distressed Grey Color Finish

• White Color Marble Top with 4" Height Back Splash

• White Marble Top Pre-drilled for 8” Widespread Faucet Holes

•

18” Vitreous China Undermount Sink(cUPC listed)

•

One Functional Drawer with Full Extension Soft-Close Glides

•

(37W x 22D x 35H) Inch

Parts List

Move the vanity into place and level with the adjustable leg leveler on the bottom of the feet. The leveler can be

adjusted upward up to 1 in / 2.5 cm but it is recommended not to exceed 1/2 in / 1.2 cm if possible.

Page 1 of 2

Front view

Side view

Leveler

10702-BS37J

6002

5004

37” White Marble

Backsplash Part#: 10702-BS37J

4x Leg Leveler Part#: 6002

Drawer Pull

Part #:5004

940 [37.0”]

889 [35.0”]

559 [22”]

Summary of content (4 pages)

PAGE 1
CANNES 37" VANITY SET 10702-VS37J-GR R Product Specification Parts List • Birch Solid Wood Frame and MDF White Marble 1x 37” Backsplash Part#: 10702-BS37J 4x Leg Leveler Part#: 6002 4x Drawer Pull Part #:5004 • Distressed Grey Color Finish • White Color Marble Top with 4" Height Back Splash • White Marble Top Pre-drilled for 8” Widespread Faucet Holes • 18” Vitreous China Undermount Sink(cUPC listed) • One Functional Drawer with Full Extension Soft-Close Glides • (37W x 22D x 35H) Inch 10702-BS
PAGE 2
VANITORIO CANNES DE 37" R 10702-VS37J-GR Especificación de producto Lista de Partes • • • • • Blanco de 37” 1x Mármol Soclo Numero de Pieza: 10702-BS37J 4x Pata Niveladora Numero de Pieza: 6002 4x Boton del Cajon Numero de Pieza: 5004 Marco de Madera de Abedul Solido con Fibra de Madera de densidad Media Acabado de color Gris Viejo Cubierta de Mármol Blanco y soclo de 4” de altura Vanitorio previamente perforado para un grifo ovalado de 8” Lavabo de porcelana vitrificada de 18” (Alistado como Cod
PAGE 3
Backsplash Installation (Coordinating backsplash included. Vanity can be used with or without backsplash.) • To install backsplash, you will need to purchase adhesive and caulk designed to work on granite. • Please follow the manufacturer’s application instructions included with the adhesive and caulk you purchased. • It is recommended that you obtain appropriate recommendations from your local hardware supplier on adhesive. and caulking. Apply the adhesive along the bottom edge of backsplash.
PAGE 4
Instalación del Soclo (Soclo de coordinación incluido. El Vanitorio se pue de usar conosin Soclo) • Para instalar el soclo necesita comprar un adhesivo y una masilla diseñada para que funcione en granito. • Por favor, siga las instrucciones del fabricante sobre la aplicación del adhesivo y la masilla que vienen incluidas con el produto. • Se recomienda que usted obtenga las recomendaciones apropiadas de su ferreteria local sobre adhesivos y enmasillado.