Installation Guide

11802-VS37A

Vanity Installation

Product Specification

• Birch Solid Wood Frame and Birch Veneer with MDF

• Antique Gray Color Finish

• Black Granite Top with 4" Height Back Splash

• Granite Top Pre-drilled for 8” Widespread Faucet Holes

• 18” Vitreous China Undermount Sink (cUPC listed)

• Two Functional

Drawers with Full Extension Soft-Close Glides

• (37W x 22D x 35H) Inch

Parts List

Move the vanity into place and level with the adjustable leg leveler on the bottom of the feet. The leveler can be

adjusted upward up to 1 in / 2.5 cm but it is recommended not to exceed 1/2 in / 1.2 cm if possible.

Page 1 of 2

Front view

37” Black Granite

Backsplash Part#: 11802-BS37A

4x Leg Leveler Part#: 6002

Drawer Pull

Part #: 5005

11802-BS37A

6002

5005

Side view

Leveler

Ella 36 in. Vanity with Black Top

PAGE 1
Ella 36 in.
PAGE 2
Backsplash Installation (Coordinating backsplash included. Vanity can be used with or without backsplash.) • To install backsplash, you will need to purchase adhesive and caulk designed to work on granite. • Please follow the manufacturer’s application instructions included with the adhesive and caulk you purchased. • It is recommended that you obtain appropriate recommendations from your local hardware supplier on adhesive and caulking. Apply the adhesive along the bottom edge of backsplash.
PAGE 3
VANITORIO ELLA DE 37" 11802-VS37A Especificación de producto Lista de Partes • Marco de Madera de Abedul Solido con Fibra de Madera de densidad Media 37” Salpicaduras Numero de Pieza: 11802-BS37A 8x Pata Niveladora Numero de Pieza: 5005 4x Boton del Cajon Numero de Pieza: 6002 • • • • Acabado de color Gris Viejo Cubierta de Granito Negro con soclo de 4” de altura Vanitorio previamente perforado para un grifo ovalado de 8” Lavabo de porcelana vitrificada de 18” (Alistado como Codigo de producto Un
PAGE 4
Backsplash Vanity