User's Manual

Normal Mode
When connected with gateway from MoCA interface or Ethernet interface, MWA1221 will enter Normal Mode.
MWA1221 will try to detect whether the connected gateway support AutoSync feature via UPnP message. The
Wi-Fi configuration could be synced from gateway following Specific “Wi-Fi AutoSync” protocol, or set manually
on web GUI.
After entering Normal Mode, MWA1221 will wait for Wi-Fi AutoSync specific UPnP messages from gateway on
either MoCA interface or Ethernet interface in 180 seconds. As if it received the specific UPNP message within
180 seconds, MWA1221 will enable Wi-Fi configuration auto-sync feature. The gateway will push all the Wi-Fi
configurations to MWA1221 by “WECB AutoSync” protocol and enable the Wi-Fi radio and SSID automatically.
If gateway supports “Wi-Fi AutoSync” feature, user could also modify the synchronized Wi-Fi configuration via
Web GUI.
The auto-sync feature covers the following configuration parameters.
 Radio Frequency (2.4GHz / 5GHz)
 Radio Modes (802.11n, 802.11ac, etc.)
 Radio Channels
 Radio Channel Bandwidth
 Radio Beacon Interval