User's Manual

1. Initial Command
i. RF Tx/Rx Performance Test
As the information showed on your screen, please enter these commands below to start your test.
(Figure 3)
Command: 1 Wi-Fi testing
Figure 3
Generate 802.11a/b/g/n Packet commands
a. Tx on CH 1 at 17 dBm with a CCK-11Mbps data rate in 20 MHz BW mode on path A
10 1 1 // Set Path A Only
112 0 // Set to 20 MHz BW
22 1 17 0 // Set to CH 1 at 17dBm Output Power with CCK/BPSK Data Rate on Path A
25 1 4 // Tx at 11 Mbps
25 0 // Stop Tx
------------------------------------------------------------------------------------------------------------------------------
b. Tx on CH 1 at 17 dBm with a CCK-11Mbps data rate in 20 MHz BW mode on path B
10 0 0 // Set Path B Only
112 0 // Set to 20 MHz BW
22 1 17 0 // Set to CH 1 at 17dBm Output Power with CCK/BPSK Data Rate on Path B
25 1 4 // Tx at 11 Mbps
25 0 // Stop Tx
------------------------------------------------------------------------------------------------------------------------------
c. Tx on CH 6 at 12 dBm with a MCS7 Data rate in 40 MHz BW Mode on Path A
10 1 1 // Set Path A
112 1 // Set to 40 MHz BW
22 6 12 1 // Set to CH6 at 12dBm Output Power with OFDM Data Rate on path A
25 1 22 // Tx at MCS 7
25 0 // Stop Tx
------------------------------------------------------------------------------------------------------------------------------