User's Manual

Data rate set up
B mode & G mode:
1Mbps
5.5Mbps
11Mbps
6Mbps
9Mbps
12Mbps
18Mbps
24Mbps
1
3
4
6
7
8
9
10
36Mbps
48Mbps
54Mbps
11
12
13
N mode:
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
15
16
17
18
19
20
21
22
After you type above command, you can measure the 802.11b/g/n packet by your RF test instrument (exp:
Agilent 4010, IQview…).
Generate 802.11b/g/n continuous symbol Commands
a. Cont. Tx on CH 7 at 12 dBm with a MCS7 Data rate in 20 MHz BW Mode on Path A
10 1 1 // Set Path A
112 0 // Set to 20 MHz BW
22 7 12 1 // Set to CH7 at 12 dBm Output Power with OFDM Data Rate on Path A
17 1 22 // Cont. Tx at MCS7
17 0 // Stop Cont. Tx
1.5 Test RX sensitivity Commands
a. Rx on CH 7 in 20 MHz BW Mode on both Path A
25 // Stop Tx
10 1 1 // Set to Path A
112 0 // Set to 20 MHz BW
12 7 // Set to CH 100
31 // Clear all the received packets
32 // Get Rx Packet Count and then clear the Rx packet counter
1.6 Others Commands
(1) Command 45
(2) Command 99