User's Manual

LSPX-P1
4-581-618-11(1)
4-581-618-11(1)
Portable Ultra Short Throw
Projector
Reference Guide
©2016 Sony Corporation Printed in Korea
LSPX-P1
Manuals supplied
Startup Guide
Read this manual first. The initial preparation, such as charging
and connecting a smartphone, is described.
Reference Guide (this document)
Safety precautions and specifications.
Help Guide (Web operating instructions)
The Help Guide describes the features of the unit and how to
use in detail. You can view the Help Guide on a smartphone or
computer.
http://xxxx
Location of controls
 Portable Ultra Short Throw Projector
 Projection window(Laser Apeture)
 Power button
 Ventilation holes (intake/exhaust)
 Power indicator
 DC IN 19.5V jack
 Distance sensor
 RESET button
 Charge indicator
 Power jack for the stand (not
supplied)
 Wireless HDMI Unit
 HDMI IN
 HDMI OUT (pass-through)
 IR BLASTER output
 DC IN 5V jack
 PAIRING button
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial
number in the space provided below. Refer to these numbers whenever you
call your Sony dealer regarding this product.
Model No. LSPX-P1 (Projector)
Serial No. _____________________________
Model No. LSPX-PT1 (Wireless HDMI Unit)
Serial No. _____________________________
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug
adaptor of the proper configuration for the power outlet.
CAUTION
Observe the following cautions, as there may be a risk of heat generation, fire or
explosion.
* Lithium-ion battery is built into the product.
• Charge the product by the designated charging method.
• Do not place the product in or near fire, or put the product in a microwave.
• Do not leave the product in a car in hot weather.
• Do not store or use the product in a hot and humid place such as in a sauna
bath.
• Do not disassemble, crush or pierce the product.
• Do not expose the product to excessive shock such as dropping from a high
place.
• Do not expose the product to high temperatures above 60 °C (140 °F).
• Keep the product dry.
Dispose of the product appropriately.
Charge the product by the designated charging method in the instruction
manual.
• Use the nearby wall outlet (wall socket) when using this unit. If any trouble
occurs while this unit is in use, unplug it from the wall outlet (wall socket) to
disconnect the power.
• For models with CHARGE lamp
Even when the CHARGE lamp is off, the power is not disconnected.
For Customers in the U.S.A.
For supplied accessories
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down
through the MAC, through the digital and analog baseband, and finally to the RF
chip. Several special packets are initiated by the MAC. These are the only ways the
digital baseband portion will turn on the RF transmitter, which it then turns off at
the end of the packet. Therefore, the transmitter will be on only while one of the
aforementioned packets is being transmitted. In other words, this device
automatically discontinue transmission in case of either absence of information
to transmit or operational failure.
Frequency Tolerance: ±15 ppm
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that it deemed
to comply without maximum permissive exposure evaluation (MPE).
But it is desirable that it should be installed and operated keeping the radiator at least
20cm or more away from person's body.
For Customers in the U.S.A.
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.
[ Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: LSPX-P1
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment must not be co-located or operated in conjunction with any other
antenna or tr
ansmitter.
CAUTION
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply
with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Caution
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This Projector is classified as a CLASS 2 LASER PRODUCT.
This CLASS 2 LASER PRODUCT label is located on the near the projection
window left side surface of the Projector.
Caution
The use of optical instruments with this product will increase eye hazard.
Precautions
Do not damage the power cord.
If the power cord is damaged, it may cause a fire or electric shock.
• Do not squeeze the power cord between the unit and a desk or wall.
• Do not modify or damage the power cord.
• Do not put a heavy object on the power cord, and do not pull the power cord.
• Keep the power cord away from a heater or other heat source.
• When unplugging, be sure to hold the plug to remove it from the wall outlet.
Do not place the unit where there is excessive oily smoke, steam,
moisture or dust.
If the unit is in such a place, or used outside the conditions recommended in this
document, it may cause a fire or electric shock.
Do not let water or foreign objects get into the unit.
If water or foreign objects get into the unit, it may cause a fire or electric shock. If
water or foreign objects have gotten into the unit, turn it off immediately, and
disconnect the power cord and connection cables.
Do not disassemble or modify the unit.
It may cause a malfunction, fire or electric shock. Consult qualified Sony
personnel on rechargeable battery replacement, internal inspection and repair.
Be sure to use the supplied AC adaptor with the unit.
If a different AC adaptor is used with the unit, it may cause a fire, electric shock or
malfunction.
If there is a possibility of lightning strike, do not use the unit.
A lightning strike may cause an electric shock. If lightning is likely, unplug the unit
to prevent a fire, electric shock and malfunction. Do not touch the unit when
thunder is heard.
Do not touch the power plug with wet hands.
If you plug/unplug the power plug with wet hands, it may cause an electric
shock.
Do not block the ventilation holes (intake/exhaust).
If the ventilation holes are blocked, heat will build up inside the unit, causing a
fire or malfunction. To maintain good ventilation, observe the following:
• Place the unit away from walls and objects.
• Do not use a cover that blocks the ventilation holes.
• Do not place the unit on a soft cloth, paper documents, thick carpet or small
pieces of paper. They may be drawn in and block the intake holes.
Do not look into the projection window.
If you look into the projection window while the projector is being used, the light
may damage your eyes.
Do not obstruct the projection window.
If you obstruct the projection window for a long time, the light will heat the
obstruction, which may cause deterioration, deformation, burns or fire.
Do not project onto a glossy surface.
The light may be reflected into your eyes and may adversely affect them.
Do not install the unit in a dangerously unsuitable location.
Do not install the unit in a location that would not provide a stable installation,
such as a ceiling or wall. The unit may fall causing an injury.
Do not use the wireless functions in unsuitable places.
Wireless functions are incorporated into this unit. Pay attention to the following
points when using the unit, and if any problems occur, do not use the unit. In an
emergency, immediately turn the unit off.
• Do not use the unit on an airplane.
Radio waves may affect the instruments of the airplane, causing a malfunction
and accident.
• Do not use the unit near any automatically-controlled equipment, such as an
automatic door or fire alarm.
Radio waves may affect the equipment, causing a malfunction and accident.
• If other equipment has any problems such as interference while the unit is
being used, immediately stop using the unit.
Radio waves may affect the equipment, causing a malfunction and accident.
Do not continue viewing the projected screen for a long time.
Continuously viewing the projected screen for a long time may cause eye strain. If
you feel any discomfort or pain, immediately stop using the unit and have a rest.
If the discomfort or pain persists after taking a rest, consult a doctor.
Turn the unit off before making connections
Before making connections with the AC adaptor and connection cables, turn off
the unit and connected equipment, and unplug the power plugs from the wall
outlet.
Use the specified power cord and connection cables.
The supplied power cord is exclusive to the unit. It cannot be used with any other
products.
Do not use any cables other than the supplied power cord and specified
connection cables with the unit. They may produce heat causing a fire or electric
shock.
Do not wrap the power cord or connection cable around the AC
adaptor.
It may cause the cord or cable to break.
Do not continue touching the unit in operation or the AC adaptor for
a long time.
Prolonged contact with the skin may result in burns. Even touching through
clothing, prolonged contact may result in burns.
Do not use the unit or AC adaptor covered by cloth or bedding.
Heat will build up causing deformation, malfunction or a fire. Before putting the
unit into a bag or similar, turn it off.