User's Manual
Table Of Contents
- Table of Contents
- Chapter 1 Legal & Regulatory
- Copyright
- Disclaimer
- Trademarks
- H.264/AVC, VC-1 and MPEG-4 License Notice
- FCC information
- CE compliance
- Working environment
- Additional environments not related to EMC
- REACH - Compliance Statement
- Following information is only valid for EU-member States:
- Following information is only for India
- Canadian regulatory information (Canada only)
- Canada - Industry Canada (IC)
- Following information is only for Turkey:
- Chapter 2 Introduction
- Chapter 3 Getting Started
- Chapter 4 Basics
- Using the touch screen
- Getting to know the Home screen
- Opening and switching applications
- Monitoring your tablet’s status
- Quick Settings
- Managing Notifications
- Locking your screen
- Capturing your screen
- Customizing the Home screen
- Changing the Screen Orientation
- Managing Tasks and Applications
- Connecting to a computer
- Factory Reset
- Chapter 5 Applications
- Chapter 6 Settings
- Chapter 7 Optional Accessories
- Chapter 8 Troubleshooting
- Chapter 9 Specifications
- Chapter 10 Information for Wireless Devices
- Index
- Glossary
1. Turn the memory media so that the contacts (metal areas) are facing
down.
2. Insert the memory media into the memory media slot on the tablet.
3. Push the memory media gently until you hear a click.
Figure 7-1 Inserting a memory media
1
2
1. Memory media slot 2. Memory media
Make sure memory media is oriented properly before you insert it. If
you insert the media in wrong direction, you may not be able to
remove it.
When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy
data.
Do not turn the tablet off or switch to Sleep Mode while files are being
copied - doing so may cause data loss
Removing a memory media
The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1. Make sure all file operations are finished.
2. Tap All Apps -> Settings -> Storage -> Unmount SD card.
3. Push the memory media until you hear a click to partially release it.
4. Grasp it and pull it out of the slot.
Do not remove the memory media while the tablet is in Sleep mode. The
tablet could become unstable or data in the memory media could be lost.
USB device
This tablet is equipped with a Micro USB port supporting USB host
function. This allows you to connect the following USB devices to the
tablet: USB flash drives, USB HDDs (only FAT file system), USB Hubs
powered by an AC adapter, game controllers, HIDs (Keyboards and
Mouses) and other USB accessories for Android-powered devices. This
port complies with USB 2.0 standard.
TOSHIBA AT300SE series
User's Manual 7-3