Manual UNIHAN UPWL6031C
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
IC Statement CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p.
USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
Antenna information: HL Technology Model NO. antenna Type 2.4G Peak gain(dbi) 5G Peak gain(dbi) 260-26021 PCB 3.34 - 260-26022 PCB 2.32 2.52 260-26023 PCB 4.64 2.73 260-26027 PCB 3.57 - 260-26028 PCB 2.58 - 260-26029 PCB 2.7 - 260-26030 PCB 2.06 2.68 260-26031 PCB 3.88 2.77 260-26032 PCB 3.65 2.56 260-26033 PCB 3.34 - 260-26034 PCB 2.65 - 260-26035 PCB 4.22 - 260-26038 PCB 2.2 2.65 260-26039 PCB 1.92 2.49 Wanshih Electronic Co., Ltd. Model NO.
About this guide This user guide contains the information your PEGATRON WIFI Module. System requirements Before installing the PEGATRON WIFI module, make sure that your system meets the following requirements: Intel® Pentium® 4 or AMD K7/K8 system Minimum 64MB system memory Windows® XP/VISTA operating system Installing the device drivers To install the device driver in your computer: Insert the support CD to the optical drive and follow the following procedure.
Step2 Step3
Step4 Step5
