Manual PEGATRON UPWL6060
1.General Description The UPWL6060 wireless module is a fully assembled and tested general-purpose module using the BCM4360 wireless System-on-Chip(SoC). The module contains BCM4360 chip and all other necessary components to operate the UPWL6060. For detailed information on the UPWL6060 component itself, refer to the UPWL6060 datasheet. 2. Features Features Description Network Standard IEEE 802.11 a/n/ac (final n) Chipset BCM4360 Input Voltage 3.3V,5V Data Rate 802.
Antenna list: Set. Ant. Brand Holder Antenna Type Connector Gain Model Name P/N 5G Antenna - PCB Antenna I-PEX 2.92 EPC-3940L 290-30151 PCB Antenna I-PEX 2.4 EPC-3940L 290-30153 PCB Antenna I-PEX 2.1 EPC-3940L 290-30154 PCB Antenna I-PEX 2.2 (dBi) HONGLIN 1 1 TECHNOLOGY CO., LTD HONGLIN 2 TECHNOLOGY CO., LTD HONGLIN 2 3 TECHNOLOGY CO., LTD HONGLIN 4 TECHNOLOGY CO., LTD Note 1: The EUT has two sets of antenna and there are three antennas for each set. 3.
● ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
Installing the device drivers To install the device driver in your computer: Insert the support CD to the optical drive and follow the following procedure.
Step 2
Step 3
Step 4
Step 5
