操作手冊 Pegatron WL-157N_MUSB 1
Contents Notice ........................................................................................…...…. 3 Safety statements .............................................................................…. 4 System requirements................................................….................…........ 6 Installing the device drivers........................................….............………....
Notices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
Safety statements Regulatory Information/Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
a body-worn way is strictly prohibit. When using this device, a certain separation distance between antenna and nearby persons has to be kept to ensure RF exposure compliance. In order to comply with the RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than [20cm]. RF Exposure The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
System requirements Before installing the PEGATRON WIFI module, make sure that your system meets the following requirements: • Intel® Pentium® 4 or AMD K7/K8 system • Minimum 64MB system memory • Windows® XP/VISTA operating system • An available USB port (USB 2.0 recommended because USB 1.1 cannot achieve maximum wireless performance) Installing the device drivers To install the device driver in your computer: Insert the support CD to the optical drive and follow the following procedure. 1.尋找新硬體 3.
5.點選以下選項,按下一步 6. 按從磁片安裝 8 . 按從磁片安裝 7.點選瀏覽,指定安裝driver安裝磁槽 9.選擇磁槽中的driver中的*.inf ,然後按確認 10.
11.點選下一步 12.
Attachment: Supplied antenna Antenna Antenna No. Manufacturer Antenna#1 PEGATRON Antenna#2 Model Connector Antenna Antenna Type Gain (Max.) 2.32dBi NONE NONE Printed (On PCB) (On PCB) (PIFA) ARISTOTLE RFA-02-C2M2-0 R SMA Dipole 2.50dBi ENTERPRISES 3 PLUG RFA-02-C2M2 R SMA Dipole 2.00dBi S SERIES 1.68dBi INC. Antenna#3 ARISTOTLE ENTERPRISES PLUG INC.