User's Manual

Page 10 of 52PTCarPhone 6 User Manual
Introduction
First Steps
Content
Phoning
Accepting a Call
Rejecting a Call
Regulating the Call Volume
Muting the Microphone
Changing from Hands-free Mode to Private Mode
Creating a Contact
Calling a Contact
Adding Phone Number to Contact
Please nd detailed descriptions of all phone features
on page 18 ff.
Phoning
1. Enter the phone number with the input keys .
2. Press the call key .
3. First the message “Dial number” appears on the
display and after the connection is made, the mes-
sage “Connected with”.
4. Talk.
5. To end the call press the end key .
Accepting a Call
1. For an incoming call, press the Accept function key
or the call key .
2. To end the call press the end key .
Rejecting a Call
For an incoming call, press the Cancel function key or
the end key .
Regulating the Call Volume
The volume during a call is regulated with the naviga-
tion keys  and .
The PTCarPhone can differentiate with the volume
control between private mode
and hands-free mode
.
NOTE:
In private mode the volume of the handset loudspeak-
er is regulated. However, the volume of the external
loudspeaker is set in hands-free mode.
Muting the Microphone
During a call, the active microphone can be muted and
reactivated using the function key MUTE. When muted,
the mute symbol appears instead of the data
transmission symbols or in the toolbar of the
display.
Mute is automatically cancelled after the call is ended.
Changing from Hands-free Mode to Private
Mode
If the handset is in the cradle hands-free mode is
active and calls go over the hands-free system (hands-
free microphone and external loudspeaker).
When the handset is lifted the PTCarPhone switches to
private mode
, i.e. from the hands-free system to the
handset.
NOTE:
For ring tones the PTCarPhone always uses the exter-
nal loudspeaker.
Creating a Contact
A contact consists of “First name”, “Surname” and up
to three phone numbers, which can be assigned to the
categories business , mobile or private .
Phone book > function key Options > Add contact
1. To open the phone book, press the navigation key
.
2. Press the Options function key.
3. Select “Add contact” with the navigation key .
4. Press the OK function key.
5. Enter the rst name with the input keys (also
see Chapter “Editors”).
6. Press the navigation key .
7. Enter the surname with the input keys .
8. Press the Next function key.
9. Select a phone number category (business ,
mobile or private ) with the navigation key .
10. Enter the phone number with the input keys .