User's Manual

Page 11 of 52PTCarPhone 6 User Manual
Introduction
11. This process is repeated for more phone numbers if
necessary.
12. End the process with the OK function key. The mes-
sage “Entry saved” is displayed.
Calling a Contact
Phone book > paging   > Call key
1. Press the navigation key , the phone book opens.
2. Scroll with the navigation keys  and  until the
contact to be called is marked.
3. Press the call key , the phone book entry for the
selected contact opens.
4. Select the desired phone number with the naviga-
tion keys  and  (business , mobile or
private ).
5. Press the OK function key.
6. First the message “Dial number” appears on the
display and after the connection the message “Con-
nected with”.
NOTE:
When you take the handset out of the cradle, a call can
be made in private mode
with the handset. When
the handset is hung in the cradle, hands-free mode
is activated.
Adding Phone Number to Contact
Phone book > function key Options > Edit contact
1. To open the phone book, press the navigation key
.
2. Scroll with the navigation keys  and , to select
the contact.
TIP:
The phone book shortens when you input the rst
letter, or several letters, of the searched name with the
input keys
.
3. Push the Options function key when the desired
contact is marked.
4. Select “Edit contact” with the navigation key .
5. Press the OK key.
6. Press the Next function key.
7. Select a free phone number category with the
navigation keys  and  (business , mobile or
private ).
8. Enter the new phone number with the input keys .
9. Press the OK key. Editing is completed and the
contact is saved.
General Tips

Always enter phone numbers as follows
+[country code][local area code][phone number]
Example: [phone]

Inserting special characters (* and P) for pauses and
other functions: By repeatedly pressing the * key,
pauses and other functions can be initialised.
The symbols represent the following functions:
* = For GSM commands, device codes or DTMF
tones (example: *#06# or *135#)
P = Sends the “pause” command via DTMF