User's Manual
Page 45 of 52PTCarPhone 6 User Manual
Additional Information
Technical Details of the Connections
I/O connections
The electronics box is equipped with six programmable
input and outputs (I/Os).
Type: Open drain output with snubber diode / input
with 15 kOhm pull-up resistor connected to the
operation voltage of the device
Only resistive and inductive loads permitted (no
capacitive loads!)
Maximum current: 100 mA per connection
Max. voltage less or equal to the operation voltage
of the device (but max. 32 V)
Snubber diode for the relay (inductive loads)
included; It is necessary to use the internal power
supply (Pin 4, 5, 6) for this purpose
Radio mute output
Type: Open drain output (switched to ground)
Resistive loads permitted only!
Maximum current: 50 mA
Maximum against ground: +32 V
Disposal
The image of the crossed-out waste bin
reminds you to dispose of waste electronic
equipment separately from normal house-
hold waste.
Please don‘t dispose of your car phone and it‘s accesso-
ries together with household waste, but rather bring it
to a local recycling or collection centres.
Also, please dispose of packaging and documentation
separately at your local recycling centre.
WEEE registration number DE 94398883
Declaration of Conformity
Please nd the declaration of conformity
on our homepage:
www.peitel.de