User's Manual

- 62 -
Pairing the iPhone with the Cradle
The iPhone must be in the vehicle but may
not be inserted in the cradle for pairing.
Note
When pairing with the cradle, the iPhone
should be fully charged.
1. Turn the ignition key to position 1, 2
or 3. (Please refer to the vehicle Operator's
Manual.)
The cradle will be available for approx. 2
minutes to establish a Bluetooth
®
connection and can be recognized by the
iPhone.
2. Select Settings  General 
Bluetooth on the iPhone and set the
button to I. (Please refer to the iPhone
manual.)
The iPhone begins to search for the cradle.
When the iPhone finds the cradle, smart
drive appears in the iPhone display.
3. Select smart drive on the iPhone. A
passkey query appears in the iPhone display.
4. Enter the passkey 76278 on the iPhone
and press connect to confirm.
5. The iPhone is now ready to be used with
the hands-free system.
Note
A maximum of 10 iPhones can be paired with
the cradle. If you try to pair an 11th iPhone
with the cradle, the iPhone which was paired
first will be deleted.