User's Manual

- 63 -
Connecting the iPhone with the
Cradle
After coupling, a connection between the
iPhone and the cradle is established
automatically.
1. Place the iPhone into the cradle and
turn the ignition key to position 1, 2 or 3.
(Please refer to the vehicle Operator's
Manual.)
2. Start smart drive on the iPhone.
(Please refer to the iPhone manual.)
3. Switch on the radio. (Please refer to the
Audio operating instructions.)
Note
There will always be only one iPhone
connected with the cradle.
Switching to Hands-free Mode
The iPhone must be inserted in the cradle,
switched on, and must switch into
hands-free mode automatically in order for
the hands-free mode to function correctly.
The Bluetooth
®
symbol (arrow) in the iPhone
display (2) switches from gray to white.
Phone calls will automatically be carried out
over the radio.
Note
If you have activated Airplane mode, no
connection will be established between the
cradle and the iPhone in the cradle. (Please
refer to the iPhone manual.)
T-Mobile
2
M+P-03F-7808