User's Manual

BTHFCK User’s Guide Revision: A Page 4
4
4
HMI control pad (Human Mashine Interface)
The HMI is your ‘home base’ → it activates initial operation of the system and provides access to all the available
features. It’s simple to use but activates some powerful capabilities.
The basic functions of the control pad are defined below.
EINBETTENEINBETTENEINBETTENFORMATVERBINDENAfter system start by a new occuring ignition signal,
the Mute and the power LED are turned on for 2 seconds. When a bluetooth connection is activated, the Connection-
LED is turned on.
Key functions
• + and Hook together for >3 seconds Resets and restarts the system.
• EINBETTENVR terminates the actual spoken prompt and starts directly the following VR.
During Phone-Call the VR is activated for “Transfer-Audio”, “Dial” DTMF or “Call” name.
in Idle and longer than 1,5s : activates the VR in the cell phone.
•
–
and VR together >
3s : activates the language selection .
EINBETTEN
EINBETTEN
Hook button:
No active call Ringing Active call 2
nd
call waiting
Short press
( < 1,5 s)
Activate the VR-
Menu
Take phone call Hang up Hang up current Call
and take waiting one
Long press
( > 1,5 s)
if BT connect exists:
- Audio transfer from
handy or take the
hold call
if no BT connection:
- connect Bluetooth
Reject phone call put the current call
on hold
switch calls
• Mic Mute: EINBETTENmutes / unmutes the microphone..
• + , EINBETTEN- changes volume level of voice prompts or phone call (depending on what is active)
Volume +
Volume –
Hook
Mic Mute
VR
Transfer Audio, DTMF
Take, Refuse, Connect BT,
Transfer-Audio back to HFK
VR cell phone activation