User's Manual

6 PARTIAL SECTION
•
Prior to giving a voice command, one must wait for
the beep, which follows the "Ready" prompt or another
prompt.
•
For certain operations, compound commands can be
used. For example, instead of saying "Setup" and then
"Phone Pairing," the following compound command can
be said: "Setup Phone Pairing."
•
For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command, when you are asked for it.
For example, you can use the combined form voice
command "Phonebook New Entry," or you can break the
combined form command into two voice commands:
"Phonebook" and "New Entry." Please remember, the
UConnect™ system works best when you talk in a
normal conversational tone, as if speaking to some one
sitting eight feet away from you.
Voice Command Tree
Refer to “Voice Tree” at the end of this section.
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say "Help" following the
beep. The UConnect™ system will play all the options at
any prompt if you ask for help.
To activate the UConnect™ system from idle, simply press
the “Phone” button and follow audible prompts for direc-
tions. All UConnect™ system sessions begin with a press of
the “Phone” button on the radio control head.
Cancel Command
At any prompt,after the beep, youcan say"Cancel" and you
will be returned to the main menu. However, in a few in-
stances the system will take you back to the previous menu.
Pair (Link) UConnect™ System to a Cellular Phone
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone .