User's Manual

To assign the role of the participant to the device, switch on and press the Minus button (-) and the Talk button (o)
simultaneously for 2 seconds.
To do so, after switching on the prospective moderator, please press the Plus button (+) and the Talk button (o)
simultaneously for 2 seconds.
The devices have not been assigned roles upon delivery (all devices are identical). This is done when the devices are
switched on for the  rst time. If you wish to switch on the devices without changing the prede ned role assignments,
press the Talk button (o) for one second. Role assignment only needs to be performed once when switched on for
the  rst time. If you would like to change the role of a device, you can repeat the process at any time (following
a reset). If you would like to increase the number of participants, the connected devices have to be reset  rst..
2 sec. (o) & (-)
Ready for us
and / found by
moderator after approx. 30 sec., when
fl ashing slowly.
2 sec. (o) & (+)
Ready for use
and/or maximum
number of participants found, after
approx. 30 sec., when fl ashing slowly.
.
Role assignment (pairing)
Assigning the moderator
Assigning participants
6