Instruction Manual

42
Connecting to an existing network
You can connect to an existing network at any time. The steps are as
follows:
 Use the "left/right" scroll buttons (2) to select the "Network" menu on the
start screen.
 Press the Select button (1).
This displays the "Wifi" submenu.
A selection list is displayed in the "WLAN" submenu, if devices with a
configured network are in wireless range.
 Use the "Up/Down" scroll buttons (2) to select the applicable network.
Press the Select button (1).
 Use the "Up/Down" scroll buttons to select "Connect".
 Press the Select button (1).
You are then connected to the network.
 To return to the start screen, press the back button (3) twice.
The start screen displays the current network.