User's Manual

INSTRUMENTS
EFT-HAND DISPLAY
▲ ♦ ✷ ❫
❚ ✒ ✔ ✡ ✌ ✌ ✑ ✡ ✟ ✧ ✒ ✓ ☛ ✌ ✌ ✑ ✡ ✧ ✥ ✠ ✠ ✒ ✠ ✔
❋
✥ ✍ ✍ ✤ ✥
❑ ❋
✑ ✡ ☛
reverse is selected:
1. Switch the ignition on.
2. Select "BOTH! or "PASSENGER! in the
mirror dip section of the cluster.
3. Depress brake and select reverse gear.
4. Adjust mirror(s) to desired position, see
Adjusting mirrors, page 1.39.
5. Take vehicle out of reverse.
The next time reverse is selected, the vehicle
will automatically move the mirror(s) to the
previously set offset from the normal
position.
❡
✱ ✭ ✪
❡
✮
➭
✪
❚ ✑ ✡ ✤ ✥ ✔
❑
✍ ✟
✴ ❋
✥ ✍ ✍ ✔ ✑ ✒
❋
✟ ✍ ✍
the possible tire types
available. Select the tires fitted to your
vehicle.
Press the OK button on the end of the control
stalk to confirm your choice.
❵
✱
➭
✪ ✭
❂
✬ ✰ ✪ ✽
❙ ✡ ✍ ✡ ✝ ✌ ✡ ✥ ✌ ✑ ✡ ✠
C
☞ ❪ ❚ ◗ ▼ ☞ ❚ ❄
❁
❨ ✒ ✠
C
❚ ❄ ▼ ❳
❉
❨
M
With "AUTOMATIC! selected, wiper operation
in the Auto position will be controlled by the
rain sensor.
With "TIMED! selected, wiper operation in the
Auto position will be an intermittent wipe. To
set the time delay for intermittent wipe, see
Wiper Sensitivity, page 3.26.
Press the OK button on the end of the control
stalk to confirm your choice.