User's Manual
MAINTAINING YOUR McLAREN
❋
LUID TOPPING UP
❫
♦
▲
➊
$
❄
✦
✌
✑
✡
✡
☛
✳
✥
☛
✡
✒
✥
✍
✥
✔
❍
✡
✍
✒
❋
✌
✑
✡
✌
✟
✠
✳
✡
✌
✍
✡
◆
✡
✍
♠
top up the oil in accordance with the
following procedure.
NOTE: Once the oil level check has been
completed and returned a value, do not
continue to test the system. This may
lead to aeration of the oil and return a
false value. To end the oil level check,
release the throttle pedal and return to
the Vehicle info menu by moving the
menu stalk back.
❡
✬
➭
➭
✱
✸
✹
✯
➭
✻
❅
✪
✪
✸
✹
✱
✸
✪
✬
✱
✼
❵
❛
❜
❝
✾
❝
❊
❞
❡
❅
✪
✭
✪
✱
✽
❈
✭
✱
✽
❥
✬
✫
✱
✸
➹
✯
✭
✮
✱
✫
the service cover is open, even when
the engine is not running.
Engine components become very hot.
Avoid contact, there is a risk of severe
burns.
WARNING: Never top up the engine oil
and the coolant at the same time as
there is a risk of cross contamination.
WARNING: If the engine is stopped
due to the Eco Start-Stop System you
should be aware that the engine may
restart without warning.
NOTE: The engine must be switched off
before carrying out the oil top up
process.
NOTE: McLaren only recommends the
use of Mobil 1 New Life 0W-40 engine oil.
1. Open the service cover, see Service
Cover, page 1.11.
2. Unscrew the engine oil filler cap.
3. Top up with the correct quantity of
Mobil 1 New Life 0W-40 engine oil, in
0.26 quart quantities. Approximately
2.90 quarts is required to raise the level
from minimum to maximum. Refer to
Top up quantity, page 5.4.
NOTE: Do not overfill. Top up in 0.26
quart quantities and then re-check
before adding further oil.