User's Manual

BEFORE YOU DRIVE
❽
PENING AND CLOSING
♥ ♦ ➦
Opening a door from inside
☞ ✤ ✒ ✒ ✠ ✝ ✟ ☛
❍
✡ ✒
❑
✡ ☛ ✡ ✤ ✦ ✠ ✒ ✧ ✥ ☛ ✔ ✥ ✤ ✡ ✌ ✑ ✡ ◆ ✡ ✑ ✥ ✝ ✍ ✡
at any time, even if it has been locked. Open
the doors only if the vehicle is stationary and
road and traffic conditions permit.
NOTE: Because the door opens outwards
and then upwards, ensure sufficient side
and overhead clearance before opening
a door.
1. Pull door handle upwards, in direction of
arrow, and push the door outwards until
the opening mechanism takes over. The
door will then swing outwards and
upwards automatically.
NOTE: When the door is opened, the
window will lower slightly. It will raise to
the closed position once the door is
shut. If the window does not lower, take
care when opening and closing the door.
Do not force the door during opening or
closing, as this could lead to the door
seals or window becoming damaged.
Closing a door
✗
7
8 ✓ ✔ ✑ ➧
❑
✓ ✍ ✍ ✌ ✑ ✡ ✤ ✒ ✒ ✠ ✤ ✒
❋
☛
❋
✟ ✠ ✤ ✔ ✟ ☛ ✤
ensure that it latches securely.
WARNING: Keep hands and other
objects clear of the door edge when
closing. This is particularly important
for vehicles fitted with soft close
latches as the door will automatically
continue to the fully closed position
when the first catch has engaged.
There is no anti-trap feature
preventing the door closing if an item
or body part is trapped between the
door and the door aperture, serious
injury and vehicle damage may occur.
If the window does not close, this may be due
to an anti-trap event. Try one of the following:
• reopen and close door
• press lock button on key fob to request
window close
• lock vehicle using button on underside
of door panel