User's Manual

MAINTAINING YOUR McLAREN
EHICLE CARE
engine bay, it is advised to drive the
vehicle and warm the engine to
operating temperature to dry off any
excessive water from the engine.
B
D
G
not allow brake dust to become
ingrained in the wheel rim finish.
Wash the wheels using warm water, a good
quality car shampoo and a wheel brush or
wash mitt that is used only on the wheels.
Apply polish to non-satin finished wheels to
assist in keeping them clean.
NOTE: Never apply polish to satin finish
wheels, this will result in localized glossy
patches on the surface of the wheel.
NOTE: Do not use acid based wheel
cleaners as these can damage the wheel
rim finish leading to corrosion.
NOTE: Ensure the brakes are fully dried
after the wheels have been cleaned
before the vehicle is stored.
warm water and a good quality car shampoo
only. Do not use petroleum or alcohol-based
cleaners.
using a window cleaning solution. An
automotive glass cleaner is recommended.
After washing the vehicle with car shampoo
containing wax, clean the outside of the
windscreen with glass cleaner. Do not use
abrasive cleaning compounds as mirror glass
is particularly susceptible to damage.
during the winter can collect on the vehicle!s
underbody, if this is not removed, corrosion
can occur. During the winter months,
regularly hose the underbody with water
paying particular attention to the wheel
arches and areas where dirt can accumulate.
h
good quality polish, following up with a
protective wax.
NOTE: Do not use cutting compound,
color restoration products or polishes
containing a harsh abrasive. These can
scratch the surface and permanently
damage the paint work.
h
o
Any stone chips or deep scratches should be
repaired as soon as possible. Contact your
McLaren Retailer for advice.