User's Manual

BEFORE YOU DRIVE
➶
EATS
♥ ♦ ✷ ▲
❚ ✑ ✡ ✦ ✓ ☛ ✝ ✌ ✥ ✒ ☛
❋
✥ ✍ ✍ ✒ ☛ ✍
✴ ❍
✡ ✟ ◆ ✟ ✥ ✍ ✟
❍
✍ ✡
❋
✑ ✡ ☛
❒
❚ ✒
Return Seat, Pull left Stalk or Press OK to
Clear$ is displayed on the left-hand display.
The vehicle must be awake with ignition off,
the driver!s door closed, and comfort
entry/exit ON.
1. Pull the control stalk towards you once
to initiate the comfort entry function.
2. If at any point you wish to cancel the
function, operate the control stalk or
open the driver!s door. A message #Seat
Returning, Operate Stalk or Open Door
to Cancel$ will appear in the left-hand
display.
NOTE: This function will only return the
seat and steering wheel to the position
they were in prior to the comfort
entry/exit function being used. It will not
use any of the memory positions, unless
the previous position was one of the
stored memory positions.
3. If the seat or steering wheel are
manually adjusted before the stalk is
used, the function will be lost and will not
be available until the next time comfort
entry/exit function is used.
NOTE: Cancel the comfort entry/exit
function by starting the engine, or by
pressing a seat or steering column
switch while the seat is returning to
position.
4. If the comfort entry/exit function is
canceled, it will not be possible to return
the seat and steering wheel to their
previous positions using this function.
The message in the left-hand display will
disappear and the control stalk will
return to its normal use. The function will
be available when comfort entry/exit is
next used.
5. Once the seat and steering wheel have
returned to their previous positions, the
message in the left-hand display will
disappear and an audible alert will
confirm that the process has been
completed.
❐
✪
❈
✻ ✪ ✰ ✽ ✪
❈
✻ ✽
❩ ✡ ✟ ✌ ✡ ✤ ✔ ✡ ✟ ✌ ✔ ✝ ✟ ☛
❍
✡
accessed using the
climate control screen on IRIS. See Heated
seats, page 4.10.
NOTE: The heated seat function is only
available when the engine is running.