User's Manual

BEFORE YOU DRIVE
❽
CCUPANT SAFETY
♥ ♦ ▲ ❦
➮
➛ ➝ ➣ ➔ ➝ ↕ ➟ ➢ ➣ ➝
➬
↔ ➙ ➜ ➤ ➞ ➙ ➣ ↕ ➙ → ➛ ➣ ➞ ➛ 4 ➣ ➛ ➙ ➜ ➣ ➢ ➛
seat belt carefully to avoid the
engagement of the inertia lock.
2. Pass the seat belt through the child
restraint as described by the child
restraint manufacturer and engage the
belt latch in the buckle.
3. Adjust the belt so that the lower section
is tight against the restraint and allow
the upper section to retract. The KISI
system will click as the belt retracts.
4. When the seat belt has retracted as far as
possible, pull on the upper section to
check that the seat belt has locked.
NOTE: The KISI system will disengage
when the seat belt has fully retracted
and can then be worn as a normal seat
belt. Once the KISI system has unlocked,
it will be necessary to fully extend the
seat belt to engage the KISI system the
next time a child restraint is used.
❡
✪ ✻ ❅ ✪ ✭ ✽ ✻ ✭
❈ ➭ ❈
✸
❀
❅ ✬ ✭
❈
✹ ✪ ✽
❵ ❛ ❜ ❝ ✾ ❝
❊
❞
✺ ❅ ✱ ✼ ✰ ✭ ✪ ✽ ✻ ✭
❈
✱ ✸ ✻
❈
✸
❀
❅ ✬ ✭
❈
✹ ✪ ✽
are designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses or for
attaching other items or equipment
to the vehicle.
WARNING: When fitting a child
restraint, always pass the upper
tether strap over the top of the seat
back.
Always ensure that if an upper tether
is provided, it is secured and
tightened fully, as this provides
maximum protection for a child.
An upper tether anchorage is provided on the
passenger!s seat.
Install the child seat and pass the upper tether
strap over the top of the seat back, secure it
to the anchorage and tighten fully.
Once the child restraint is installed, test the
security of the installation, before seating a
child. Attempt to twist the child seat from side
to side and to pull it away from the vehicle
seat, to check it is securely in place.