User's Manual
BEFORE YOU DRIVE
ASHERS AND WIPERS
♥
♦
❖
❦
Single wipe
✗
&
➋
✒
✠
✟
✔
✍
✒
❋
✔
✥
☛
✳
✍
✡
❋
✥
❑
✡
♠
❍
✠
✥
✡
✦
✍
✴
❑
✓
✔
✑
✌
✑
✡
wiper stalk and release. The wipers will
operate once at slow speed, without
washers.
2. For a fast single wipe, push and hold the
wiper stalk down. The windscreen wipers
will perform a continuous fast wipe until
the stalk is released.
❵
✱
✸
✰
✽
❀
✭
✪
✪
✸
❣
❈
✽
❅
E
❣
✱
➭
✪
G
✓
✍
✍
✌
✑
✡
❋
✥
❑
✡
✠
✔
✌
✟
✍
✵
✌
✒
❋
✟
✠
✤
✔
✴
✒
✓
&
The windscreen washers and wipers will
initially operate at a slow speed while the stalk
is held. If the stalk is held for more than 2
seconds, the wiper will operate at high speed.
When the stalk is released, the wipers will
complete their cycle and return to the parked
position. After a period of time the wipers will
operate once more to wipe any remaining
washer fluid from the windscreen.
NOTE: The position of the washer jets are
set during vehicle manufacture and
should not need adjusting. If a problem
occurs, consult your McLaren Retailer.